Digitaliocontrol - Toshiba BG205M-CS Instruction Manual

DigitalIOControl

This section describes DigitalIOControl category for the BG series.
This camera provides GPIO output selected by the register setting. And the polarity of the signal is able to
switch by the register setting. The following chart shows the specifications of the selectable signals.
FRAME TRIGGER
● Registers
Register Visibility
LineSelector Expert
LineMode Expert
LineInverter Expert
LineSource Expert
LineFormat Expert
Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved.
EXT_TRIG
Exposure
VD
Image Transfer
GigE Bus
TIMER0 ACTIVE
EXPOSURE
ACTIVE
FRAME ACTIVE
FRAME
TRANSFER
WAIT
Fig.5-9 Selectable signals
Access
R/W Selects the Line of I/O connector.
R Returns the direction of each Line signal.
R/W Selects the polarity of GPIO output signal.
R/W Selects the source of the output signal.
R Returns the type of each Line signal.
Delay Duration
Description
53 / 80
* ActiveLow
D4235067D
http://www.toshiba-teli.co.jp/index.htm