Download  Print this page

Toshiba BG205M-CS Instruction Manual

Bg series cmos camera.
Hide thumbs

Advertisement

BG Series
CMOS Camera
Instruction Manual
Model
B/W Camera
Color Camera
Thank you for purchasing our product.
Before using this CMOS camera, Please read through this instruction
manual carefully in order to use this product correctly and safely.
After reading, keep this instruction manual handy so that you can refer to,
whenever you need it.
Information contained in this document is subject to change without prior notice.
Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved.
: BG205M-CS
: BG205MC-CS / BG205MCF-CS
D4235067D
http://www.toshiba-teli.co.jp/index.htm

Advertisement

Table of Contents

   Related Manuals for Toshiba BG205M-CS

No related manuals

   Summary of Contents for Toshiba BG205M-CS

  • Page 1 After reading, keep this instruction manual handy so that you can refer to, whenever you need it. Information contained in this document is subject to change without prior notice. D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 2: Table Of Contents

    Gamma ............................66 BlackLevelCorrection ........................67 LUTControl ............................ 68 TransportLayerControl ........................69 UserSetControl..........................73 ALCControl ............................ 75 6. Warranty rules ......................79 7. Repair ........................80 1 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 3: Safety Precautions

    The content of prohibition is shown by a picture or words beside the symbol. This sign indicates MANDATORY ACTION (You are required to do). MANDATORY The content of action is shown by a picture or words beside the symbol. 2 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 4: General Handing

     Do not be handled roughly, damaged, fabricated, bent forcefully, pulled, twisted, bundled, placed under heavy objects or heated the power cable and the connection cable. Avoid Otherwise, fire or electric shock may result. 3 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 5 (every approx five years). Accumulation of dust inside the equipment may result in fire or electric shock. For inspection and cleaning costs, contact your sales representative. Instruction 4 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 6: Cases For Indemnity (limited Warranty)

    ● The item that is not described in specifications of this product is out of the guarantee. ● The case of damages or losses which are caused by incorrect connection of the cable is out of the guarantee. 5 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 7: Restriction For Use

    (*2): Equipment relating to maintenance of public services/functions involving factors of safety refers to. - Traffic control systems for air transportation, railways, roads, or marine transportation - Equipment for nuclear power generation - Equipment related to the above 6 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 8: Notes On Using This Product

    CS-mount lens 4.9mm or less ● Mounting to pedestal When mounting this product to a pedestal, make sure carefully that lens doesn’t touch with the pedestal. 7 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 9 Never use alcohol, benzene, thinner, or other chemicals because such chemicals may damage or discolor the paint and indications. If the image pickup surface becomes dusty, contaminated, or scratched, consult your sales representative. 8 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 10 Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be require to correct the interference at his own expense. 9 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 11 The brightness of the upper part of the screen may be different from that of the lower part. Note that this is a characteristic of a CMOS image sensor and is not a fault. 10 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 12 This information is applicable for People's Republic of China only. リサイクルに関する情報(包装物) 有关再利用的信息(包装物) Information on recycling of wrapping composition 内部緩衝材料・袋 内部缓冲材料·袋 箱/箱子/Box Internal buffer materials・Bag ペーパーボード 纸板 Paper board 11 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 13: Installation

    / distributor. ● TOSHIBA TELI CORPORATION Top Page http://www.toshiba-teli.co.jp/index.htm ● Service & Support https://www.toshiba-teli.co.jp/cgi/ss/en/service.cgi Please refer to the TeliGevSDK startup guide, about Operation environment, Installation, and Setup. 12 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 14: Specifications

    4. Specifications Overview This BG series is an integrated-(one-body)-type monochrome and color camera that adopts a global shutter CMOS sensor. BG205M-CS (2M 2/3 type, monochrome), BG205MC-CS (2M 2/3 type, color) and BG205MCF-CS (2M 2/3 type, color, IR-cut). ®* For video output, the Gigabit Ethernet interface standard "IEEE802.3ab"...
  • Page 15 * The character [F] is not shown in the common part of specifications. ● Compact and lightweight This camera is compact and lightweight; it is easy to integrate into industrial equipment. ● EU RoHS & Chinese ROHS 14 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 16: Configuration

    PoE. Please use 1000BASE-T equipments, supporting Jumbo Frame is recommended. *1: Optional part. Contact your dealer / distributor for details of option units. *2: Commercial items. 15 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 17: Connection

    Please confirm it before use. Lost packets may occur by an electrical characteristic of the transmission line of using Ethernet devices (LAN cable, Network Interface Card, Switching HUB). 16 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 18: Connector Pin Assignment

    Pin No. Signal Function +12V Power Line 0 External Trigger Input Line 1 GPIO_0 Output (LVTTL) Line 2 GPIO_1 Output (Open Collector) I/O GND I/O_Ground Ground 17 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 19 This camera has two ways of power supply, - Supply from LAN cable (PoE) - Supply from camera cable (DC+12V ±10%) If both PoE and DC+12V are connected, power is supplied from PoE. 18 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 20: Outline Drawing

    Outline Drawing Fig.4-2 Outline Drawing 19 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 21: General Specifications

    Camera body grounding: No conductive between circuit GND and camera body insulation status *1 F1.4, Gain: Maximum (+18dB), video level: 50% *2 at the all pixel readout 20 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 22 - As for the CS-mount lens used combining this camera, the projection distance from bottom of the screw should use 4.9mm or less. Bottom of the screw CS-mount lens 4.9mm or less 21 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 23: I/o Specification

    LINE2 50mA (input current) Polarity : Positive / Negative bipolar (initial factory setting: Negative) Signal Source : VD TIMER0 ACTIVE EXPOSURE ACTIVE FRAME ACTIVE FRAME TRANSFER FRAME TRIGGER WAIT 22 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 24: Trigger Input

    LINE0 (2pin) TRIG_IN (5pin) I/O_GND TLP291 - GPIO Output GPIO Signal Output Circuit LINE2 GPIO0 (3pin) (6pin) LINE3 (4pin) GPIO1 TLP291 (5pin) I/O_GND Fig.4-3 Circuit diagram 23 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 25 Trigger amplitude +3.3V 2.92 26.2 +12V 2.12 31.2 +24V 2.12 31.2 * Toff and Ton are typical value. * These values are changed in operating environment. 24 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 26 Toff [μs] Ton [μs] Pull-up amplitude +3.3V 53.2 +12V 78.4 +24V 94.4 * Toff and Ton are typical value. * These values are changed in operating environment. 25 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 27 Trigger in Width High Trig in (logic) High threshold Anti Chattering Low threshold Sampling Process Count Sampling step High Act Trig Actual Trigger Width Fig.4-6 Anti-chattering process 26 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 28: Timing Specification

    PayloadSize is total bytes of single frame. The formula applies when SCPS (Stream Channel Packet Size) is 1500 byte / packet. (T1 varies depending on the value of SCPS) 27 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 29 0.26 0.26 BG205MC-CS 0.26 0.26 * TDLY3, TDLY4: TriggerSamplingPeriod (typical value) Max TriggerSamplingPeriod x 1.625[μs], Min TriggerSamplingPeriod x 0.625[μs] * T3 and T4 are typical value. 28 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 30 When the interval of the input trigger signal is extremely short, or when the trigger signal is noisy, there is a possibility of causing the malfunction. In this case, please input a proper trigger signal. 29 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 31: Typical Spectral Response

    Typical Spectral Response * The lens characteristics and light source characteristics is not reflected in table. (a) BG205M-CS 30 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 32 (b) BG205MC-CS (c) BG205MCF-CS Fig.4-9 Spectral Response 31 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 33: Operating Ambient Conditions

    << DC operation>> - DC Cable CPCBG-03 - LAN Cable LD-TWST/BM30 (ELECOM CO., LTD) Please confirm the EMC adaptability when it combines with parts other than them. 32 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 34: Functions

    BlackLevelCorrection Set black level correction LUTControl LUTControl Control LUT TransportLayerControl TransportLayerControl Control transport layer UserSetControl UserSetControl Load / Save user setting ALCControl ALCControl Control ALC operation 33 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 35 Gain ○ BalanceRatio ○ BalanceWhiteAuto ○ ○ BlackLevel ○ ○ Gamma ○ ○ BlackLevelCorrection ○ ○ LUTControl ○ ○ TransportLayerControl ○ ○ UserSetControl ○ ○ ALCControl 34 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 36: Devicecontrol

    Executes activating the validation of the consistency. DeviceRegistersCheck Expert Executes the validation of the current register set for consistency. Returns the result that executed “DeviceRegistersCheck”. DeviceRegistersValid Expert TRUE: Consistency, FALSE: Inconsistency 35 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 37: Scalable

    Sets horizontal offset (in pixels) from the origin to the region of interest. OffsetY Beginner Sets vertical offset (in pixels) from the origin to the region of interest. 36 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 38 Maximum unit size (*) 2048×1088 2048×1088 * initial factory setting ● Note Changing “Width”, “Height”, “OffsetX”, “OffsetY” register value is invalid during image stream data output. 37 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 39: Decimation

    4 lines vertical decimation 8 lines vertical decimation Fig.5-2 Decimation operation ● Registers Register Visibility Access Description DecimationVertical Beginner Set the number of vertical Decimation line(s). 38 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 40 Decimation function is disabled when the camera is running in Scalable mode. Scalable function is disabled when the camera is running in Decimation mode. Changing "DecimationVertical" register value is invalid during image stream data output. 39 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 41: Reverse

    Set the following value to "ReverseX", "ReverseY" registers. Setting value is Boolean type. Value Image reverse FALSE (*) Non reverse TRUE Reverse * initial factory setting ● Note 40 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 42: Pixelformat

    Bayer Blue Green 8 bit True True BayerGB8 Bayer Green Blue 8 bit * initial factory setting ● Note Changing “PixelFormat” register value is invalid during image stream data output. 41 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 43: Testimageselector

    TestImageSelector BG series support test pattern data output. Camera provides following Test patterns; Black White BrightGrey DarkGrey GreyHorizontalRamp Fig.5-4 Test pattern 42 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 44 All pixel = 255 @Mono8 BrightGrey All pixel = 170 @Mono8 DarkGrey All pixel = 85 @Mono8 GreyHorizontalRamp Horizontal Ramp * initial factory setting ● Note 43 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 45: Acquisitioncontrol

    - Sets number of Exposures for FrameBurstStart trigger Set the following value to “AcquisitionFrameBurstCount” register. Setting value is Integer type. FrameBurstCount Value Minimum (*) 1 [time] Maximum 255 [times] * initial factory setting 44 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 46 Depends on your PC or Gigabit Ethernet interface board configurations, images may not be captured normally (e.g. frame drops may occur). In this case, change to frame rate setting lower. 45 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 47: Triggercontrol

    * The camera operation not mentioned above is not guaranteed. - Trigger Porarity Operation point of HardwareTrigger is at the edge of trigger signal, and active edge polarity is able to change by register setting. 46 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 48 2. FrameBurstStart: Camera exposes and transfers multiple frames by a single trigger. Trigger ExposureTime AcquisitionBurstFrameCount = 4 Exposure GbE bus Image Image Image Image FrameRate Fig.5-6 Trigger Type 47 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 49 Selects trigger source of Random Trigger Shutter. TriggerActivation Beginner Selects trigger polarity of hardware trigger. TriggerDelay Expert Sets trigger delay. TriggerSamplingPeriod Expert Sets sampling period for Anti-Chattering. 48 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 50 - Grabs image stream by software trigger When executes “TriggerSoftware” register command, software trigger command is generated. And the camera starts exposure by receiving software trigger command in software trigger mode. 49 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 51 In SoftwareTrigger operation, it takes less than 1ms from “TriggerSoftware” command to exposure start. When set longer value to “TriggerSamplingPeriod” register, noise immunity of trigger input line is improved, but the delay time of receiving trigger signal become longer. 50 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 52: Exposurecontrol

    Fig.5-8 Exposure control ● Registers Register Visibility Access Description ExposureMode Beginner Selects manual exposure mode. ExposureTime Beginner Sets absolute exposure time(timed mode). ExposureAuto Beginner Sets AE operation. 51 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 53 Function Off (*) Manual Exposure control Auto Exposure control * initial factory setting ● Note Changing “ExposureMode” register value is invalid during image stream data output. 52 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 54: Digitaliocontrol

    Expert Selects the polarity of GPIO output signal. LineSource Expert Selects the source of the output signal. LineFormat Expert Returns the type of each Line signal. 53 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 55 The delay time and pulse width of this signal are configurable. Internal VD sync signal. * initial factory setting ● Note About the details of Timer0Active signal, refer to “TimerControl” of "Functions". 54 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 56: Timercontrol

    - Set the width of Timer0Active pulse Set the following value to “TimerDuration” register. Setting value is Float type. Pulse width Value 0.00[μs] Minimun (*) Maximum 2000000.00[μs] * initial factory setting 55 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 57 - Set the delay of Timer0Active pulse Set the following value to “TimerDelay” register. Setting value is Float type. Delay Value 0.00[μs] Minimun (*) Maximum 2000000.00[μs] * initial factory setting ● Note 56 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 58: Eventcontrol

    (2) FrameTriggerError : Rejection of Frame Start Trigger. (3) FrameTriggerWait : Start of waiting for Frame Start Trigger. Fig.5-11 FrameTrigger / Error / Wait Event timing 57 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 59 Returns the average luminance at the time of Event. EventALCConvergedExposureTime Expert Returns the exposure time at the time of Event. EventALCConvergedGain Expert Returns the gain at the time of Event. 58 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 60 Set the following value to “EventNotification” register. The setting value is Enumeration type. Value Event notification Off (*) Inactive Active * initial factory setting ● Note This camera takes about 4 ms to event notification. 59 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 61: Gain

    Register Visibility Access Description GainSelector Beginner Returns the luminance component of Gain setting. Gain Beginner Sets the absolute Gain. GainAuto Beginner Sets activation of AGC mode. 60 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 62 Setting the gain value too high increases noises. When you adjust the brightness of the image, I ask you to have final image quality checked with your environment. 61 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 63: Balanceratio

    Select the color component of white balance gain to control in “BalanceRatioSelector” register. Setting value is Enumeration type. Value Function R (*) BalanceRatio = R Gain BalanceRatio = B Gain * initial factory setting 62 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 64 Too high white balance gain increases noises. After adjusting the white balance of the image, I ask you to have final image quality checked with your environment. 63 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 65: Balancewhiteauto

    Off (*) No operation Once Execute auto white balance once. * initial factory setting ● Note BalanceRatio and BalanceWhiteAuto controls are available in following PixelForamt modes. Bayer*8 64 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 66: Blacklevel

    Set the following value to “BlackLevel” register. Setting value is Float type. BlackLevel Value Minimum -5.00[%] Maximum +25.00[%] * initial factory setting = 0.00[%] ● Note 65 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 67: Gamma

    - Set Gamma correction Set the following value to “Gamma” register. Setting value is Float type. Gamma Value Minimum 0.45 Maximum (*) 1.00 * initial factory setting ● Note 66 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 68: Blacklevelcorrection

    In the case of TriggerWidth mode of RamdomTriggerShutter, this function is invalidation. When change the ExposureTime setting or the camera temperature, may result in over-correction by correction tracking speed. 67 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 69: Lutcontrol

    “LUTIndex” register value is input level of LUT process, and “LUTValue” register value is output level of LUT process. LUTIndex / LUTValue Value Minimum (*) Maximum 1023 * initial factory setting ● Note 68 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 70: Transportlayercontrol

    Sets Persistent IP Address. GevPersistentSubnetMask Beginner Sets Persistent IP Subnet Mask. GevPersistentDefaultGateway Beginner Sets Persistent IP Default Gateway. GevLinkSpeed Expert Returns the speed of transmission negotiated. 69 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 71 Sets the destination IP address of the stream channel. GevSCSP Guru Returns the source port of the stream channel. BlockStartDelay Expert Sets the delay to insert between each image flame for the stream channel. 70 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 72 In this case, change the packet size more than 1500[byte/packet]. And we recommend you to use network equipments (NIC, Switching HUB, etc. ) supporting Jumbo Frame. 71 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 73 SCPS - 36 Fig.5-17 Packet delay Value GevSCPD BlockStartDelay Minimum (*) Maximum 0xFFFFFFFF 0xFFFFE795 * initial factory setting * unit of value = 8ns ● Note 72 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 74: Usersetcontrol

    AnalogControl BlackLevel PixelFormat BalanceRatio AcquisitionMode Gamma AcquisitionFrameRate ALCPhotometricAreaSize TriggerMode ALCReferenceLuminance TriggerSource ALCExposureValue TriggerActivation ALCTolerance AcquisitionControl TriggerDelay ALCControl ALCThrottle TriggerSamplingPeriod ALCExposureTimeMin ExposureMode ALCExposureTimeMax ExposureTime ALCGainMin ExposureAuto ALCGainMax 73 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 75 “UserSetDefaultSelector” register and applies them at the time of next start-up. ● Note Changing “UserSetLoad” register value is invalid during image stream data output. 74 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 76: Alccontrol

    Sets a minimum value of the gain when ALC(AGC) feature is running. ALCGainMax Expert Sets a maximum value of the gain when ALC(AGC) feature is running. 75 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 77 An Image luminance at ALC operation converges on a reference luminance. (at ALCExposureValue = 0 [eV]). ReferenceLuminance Value Minimum Maximum * initial factory setting = 84 76 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 78 Set the following value to “ALCLock” register. The setting value is Boolean type. You can lock ALC operation by using this function. Value Activation FALSE (*) inactive TRUE active * initial factory setting 77 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 79 0.00[dB] (*) more than GainMin Maximum less than GainMax 18.00[dB] (*) * initial factory setting ● Note ALC operation at Random Trigger Shutter mode is not guaranteed. 78 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 80: Warranty Rules

    9. Forgery product, products which does not have proper serial number, products of which serial number is forged, damaged or deleted 10. All defects that happened after the expiration for a warranty term 79 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 81: Repair

    10. The immunity from responsibility of the product is applied in the repair completion products. * Please refer for the inquiry about the software to our homepage or sales personnel. 80 / 80 D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...
  • Page 82 □ It certainly occurs. □ It sometimes occurs. □ It occurs, after time passes. ( □ Others ) <For dealer use> Reception date : Receipt No. : JOB No. : Check : D4235067D Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

This manual is also suitable for:

Bg205mcf-csBg205mc-cs

Comments to this Manuals

Symbols: 0
Latest comments: