Table of Contents
Advertisement
Configuration
The system configuration of this camera series is as follows;
This camera does not include any accessories. Please prepare other equipments separately.
● Camera:
● Camera mounting kit CPT8600 (*1):
● LAN Cable (*2):
● Network Interface Card (NIC) (*2):
● PoE Switching HUB etc. (*2):
*1: Optional part. Contact your dealer / distributor for details of option units.
*2: Commercial items.
Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved.
This product. (BG series)
To fix a camera to a tripod; attach this to the bottom of the
camera.
This cable is used to connect the camera to host equipment.
Ethernet packets (stream and control) are transmitted via this
cable. Please use a LAN cable that supports 1000BASE-T (Cat
5e or over). This product is able to connect a LAN cable that is
equipped with screw lock mechanism. Please use it as needed.
This is the interface card to connect to the camera. Usually this
card is installed to expansion slot of host equipment such as PC
etc. Please use 1000BASE-T NIC, supporting Jumbo Frame is
recommended.
Use these equipments when you supply power to the camera
from PoE. Please use 1000BASE-T equipments, supporting
Jumbo Frame is recommended.
15 / 80
D4235067D
http://www.toshiba-teli.co.jp/index.htm
Advertisement
Table of Contents
