Pioneer DVR-520H-S Service Manual page 99

5
Table 2: Key operations in General Setting mode
QQ
3 7 63 1515 0
Key
INPUT SELECT,
CHANNEL +/–
(∗R)
[SIDE A], [SIDE B]
[Rev ×3], [×3 Fwd]
[Rev CHAPTER SKIP]
[CHAPTER SKIP Fwd]
[Rev SCAN],
[SCAN Fwd]
[Rev STILL STEP],
[STILL STEP Fwd]
[SPEED +], [SPEED -] HD Err Det
CLEAR
TE
L 13942296513
ESC
∗R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
∗1 : In General Setting mode, if the channel displayed has specific settings, the following will be displayed.
[Display in General Setting mode when the channel currently displayed has specific settings]
AVIO Specific Area Mode Ver*.**
Input - [tuner ]
Sync AGC
Threshold
V-Sync Det
Std Det
HD Err Det
This channel is set up
individually.
www
.
5
http://www.xiaoyu163.com
6
Operation
Switches inputs or channels.
Sets Sync AGC.
Sets Threshold level.
Sets Threshold level.
Sets V-Sync Det.
Sets Std Det.
Initializes the setting of General
Setting mode.
Exits AVIO setting for specific areas,
clearing the OSD.
: ON *
: Normal *
: Normal *
: Normal *
: Normal *
x ao u163
y
i
6
http://www.xiaoyu163.com
7
(effective only during recording/playback stop)
2 9
8
Setting (∗: Default)
–
ON (∗) / OFF
(∗) Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
According to the setting of Threshold,
the values can be changed within the
range mentioned below.
• Normal:
The value is fixed, with no display of
the value.
• Auto Threshold Level:
0-8 (Default: 0)
• Manual Threshold Level:
0-8 (Default: 0)
• Pedestal Level:
0-8 (Default: 0)
Normal (∗) /Short/Long
Normal (∗) /Non STD
Normal (∗) /Fast/Stop
–
Q Q
3 6 7 1 3 1 5
–
co
.
DVR-520H-S
7
8
9 4 2 8
Remarks
–
–
–
–
–
–
–
–
–
–
Pressing the key resets all settings
of General Setting mode to the
initial values. Settings of Specific
Channel Setting mode are not
0 5 8 2 9 9 4 2 8
affected (they are retained).
–
m
9 9
A
B
C
9 9
D
E
F
99
8