Table of Contents
Advertisement
KS-FX850R/KS-FX835R/KS-FX820R
Information f or using a car audio service jig
1. We're advancing efforts to make our extension cords common for all car audio products.
Please use this type of extension cord as follows.
2. As a U-shape type top cover is employed, this type of extension cord is needed to check operation of the
mechanism assembly after disassembly.
3. Extension cord : EXTKSRT002-18P ( 18 pin extension cord ) For connection between mechanism assembly
and main board assembly.
Check for mechanism driving section such as motor ,etc..
Disassembly method
1. Remove the bottom cover.
2. Remove the front panel assembly.
3. Remove the top cover .
4. Install the front panel.
5. Confirm that current is being carried by connecting
an extension cord jig.
Note
Available to connect to the CP701 connector when in-
stalling the front panel.
to Cassette mechanism
EXTKSRT002-18P
2-10
Extension cord
EXTKSRT002-18P
Main board
Main board
to Main board
Cassette mechanism
Front panel assembly
Advertisement
Table of Contents
