Hoshizaki FM-300AKE-HC Service Manual page 30

The ice detector is different for flake icemaker and nugget icemaker. If incorrect detector is
attached, the bin control function will not work. If the icemaking operation continues, the
abnormal stop switch trips and the unit stops with an error. Be sure to attach the proper ice
detector. The actuator is composed of two components bonded. The letters "C" and "F" are
stamped on the fitting part. The type of icemaker can be distinguished by boss fitting
position.
Spout Cover
Chute
Spout
Flake
Nugget
Actuator Magnet
Actuator Hinge
Actuator
Actuator
Ice Detector
Icemaking
Magnet
Ice Detector
F
27
Bin Control
Ice
Boss fitting position
C
C: Nugget
F: Flake
Reed Switch
Magnet