Kawai ES8 Owner's Manual page 25

3. Adjusting the Reverb settings (type/depth/time)
While the reverb settings menu is shown, to change the reverb type:
Press the  or  VALUE buttons to cycle through the different
reverb types.
Reverb Type
= Room
Reverb Type
= Small Hall
To change the reverb depth:
Press the  or  MENU buttons to select the 'Reverb Depth'
page, then press the  or  VALUE buttons to decrease or
increase the reverb depth setting.
* The reverb depth setting can be adjusted within the range of 1~10.
Reverb Depth
= 5
Reverb Depth
= 10
To change the reverb time:
Press the  or  MENU buttons to select the 'Reverb Time'
page, then press the  or  VALUE buttons to decrease or
increase the reverb time setting.
* The reverb time setting can be adjusted within the range of 1~10.
Reverb Time
= 5
Reverb Time
= 2
To exit the reverb settings menu and return to normal playing
mode, press the EXIT button or wait 4 seconds.
* Reverb settings are independent for each sound variation.
* Any changes made to the reverb type, settings, or on/off status will
remain until the power is turned off.
* Preferred reverb settings can be stored to a Registration memory for
convenient recall. Please refer to page 34 for more information.
Example: To change the reverb type from 'Room'
to 'Small Hall' , press the VALUE  button twice.
Example: To increase the reverb depth, press the
MENU  button to select the 'Reverb Depth' page,
then press and hold the VALUE  button.
Example: To reduce the reverb time, press the
MENU  button to select the 'Reverb Time' page,
then press and hold the VALUE  button.
25