Advertisement
1.
Connect the heater to a power socket, then switch the ON/OFF switch on the side panel.
2. Press the buttons on the operation panel or remote control to set the heating.
3. Press the
Frost-Free mode.
Press the power button "
alternately "
" displaying at Comfort II power, or Frost-free mode "
Under heating status, the heating icon "
status, if the ambient temperature is higher than 5°C, then the heating icon will disappear.
The temperature can only be set under Comfortable or Economical mode. Under ECO and Frost-
free modes, the set temperature is fixed to 18°C and 5°C respectively. Press the temperature
button "
", then use the UP/DOWN buttons "
50°C. The setting will be memorized and confirmed after 10 seconds.
When the ambient temperature is equal to the preset temperature, the power will switch
•
from Comfortable mode to Economical mode automatically.
When the ambient temperature is 2°C higher than the preset temperature, the heater will
•
stop heating.
When the ambient temperature is 2°C lower than the preset temperature, the heater will
•
switch to Comfortable mode again.
Note: the set temperature must be set to a temperature higher than the ambient temperature,
otherwise the unit will not function.
Press the Timer Button "
0~24 hours. When the timer status is active, the "
memorized and confirmed after 10 seconds.
If the timer is set under standby status, it will function to switch the heater ON.
•
If the timer is set while the heater is running, it will function to switch the heater OFF.
•
For example, if you set the timer to 01:00 under standby status, the heater will switch on after
one hour. If you then set the timer to 01:00 while the heater is operating, it will switch off after
one hour.
O
I
II
button on the heater, and the machine will go into Standby Mode and
" to set to ECO mode, with
Flashing means the heater is in ECO mode
Flashing means the heater is at low power
Flashing means the heater is at high power
Flashing means the heater is in frost-free mode
", then use the UP/DOWN buttons "
Mode
OFF (Stop)
1000W
2000W
displaying at Economic I power, or
" will appear on the LCD screen. Under Frost-free
" to set the temperature between 15°C to
" timer symbol will flash. The setting will be
5
".
" to set the timer from
Advertisement
