Kogan KAHTP20BLKA Quick Start Manual page 5

1. Take out the wall brackets and expansion screws from the box, then fix the screws onto
the wall according to the distances between the holes of the wall brackets, as shown in
the image below.
Hook
Hook
2. Aim the 4 holes in the back of the heater to the 4 hooks on the wall bracket and push it
on, then slide them into the slots to click on, as shown in the image below.
3. Fix the wall bracket lock piece onto the bracket with screws, slide the lock piece into the
locking slot on the back of the heater, then tighten the screw, as shown in the image
below.
Wall Bracket
Lock Piece
4
Expansion Screw
Expansion Screw