Related Manuals for Kogan KAHTP20BLKA
Summary of Contents for Kogan KAHTP20BLKA
- Page 2 General Safety Warnings............................2 Technical Specifications.............................. 2 Product Layout................................3 Assembly..................................3 Free Standing................................3 Wall Mounting................................3 Operation..................................5 Setting Temperature............................... 5 Timer Setting................................5 Maintenance..................................6 Overheating Safety Device........................... 6 Storing..................................6 Recycling..................................6...
- Page 3 Keep the appliance and cable away from other sources of heat, sharp objects or • anything else that may cause damage. If the cord is damaged, it must be replaced by Kogan.com in order to avoid a hazard. • Ensure the appliance is switched off before connecting to the mains power supply.
- Page 4 Decorative Glass 2. LCD Screen (blank when OFF) 3. Operation Buttons 4. Feet 5. Rear Cover 6. Power ON/OFF Switch 7. Power Cable 8. Sensor 9. Remote Controller Attach the two plastic feet to the bottom, then fix with the provided screws with the help of a screwdriver.
- Page 5 Take out the wall brackets and expansion screws from the box, then fix the screws onto the wall according to the distances between the holes of the wall brackets, as shown in the image below. Hook Expansion Screw Hook Expansion Screw 2.
- Page 6 Connect the heater to a power socket, then switch the ON/OFF switch on the side panel. 2. Press the buttons on the operation panel or remote control to set the heating. Mode OFF (Stop) 1000W 2000W 3. Press the button on the heater, and the machine will go into Standby Mode and Frost-Free mode.
- Page 7 Inspect for blockages of the air inlets or outlets, attempting to restart the heater after. If the heater fails to operate or the safety device switches the heater off again, contact the Kogan.com customer support team for further information. Always disconnect the heater, allow it to cool and then clean it before storing it.