Asus Z170 PRO GAMING User Manual page 82

Post Report [5 sec]
This item appears only when you set Boot Logo Display to [Disabled]. This item allows you to
select a desired post report waiting time. Configuration options: [1 sec] ~ [10 sec] [Until Press
ESC].
2.8.4 Boot up NumLock State [Enabled]
This item allows you to enable or disable power‑on state of the NumLock. Configuration
options: [Disabled] [Enabled]
2.8.5 Above 4GB MMIO BIOS assignment [Disabled]
This item allows you to enable or disable boot with initialization of a minimal set of devices
required to launch active boot option. This item is ineffective for BBS boot options.
Configuration options: [Disabled] [Enabled]
2.8.6 Wait for 'F1' If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2.8.7 Option ROM Messages [Force BIOS]
[Force BIOS]
[Keep Current]
2.8.8 Interrupt 19 Capture [Disabled]
This item allows you to trap Interrupt 19 by the option ROMs. Configuration options:
[Disabled] [Enabled]
2.8.9 Setup Mode [EZ Mode]
[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]
2.8.10 CSM (Compatibility Support Module)
Allows you to configure the CSM (Compatibility Support Module) items to fully support the
various VGA, bootable devices and add‑on devices for better compatibility.
Launch CSM [Enabled]
[Auto]
[Enabled]
[Disabled]
The following four items appear when you set Launch CSM to [Enabled].
2-42
The third‑party ROM messages will be displayed during POST.
Disables the ROM messages and displays only the ASUS logo during
POST.
This item allows you to go to EZ Mode of the BIOS after POST.
The system automatically detects the bootable devices and the add‑on
devices.
For a better compatibility, enable the CSM to fully support the non‑UEFI
driver add‑on devices or the Windows
Disable the CSM to fully support the Windows
Security Boot.
UEFI mode.
®
Security Update and
®
Chapter 2: BIOS information