Changing A Fuse - Ford EVEREST 2015 Owner's Manual

The engine compartment fuse box has
high-current fuses that protect your
vehicle's main electrical systems from
overloads.
When you disconnect and reconnect the
battery, you will need to reset some
features. See Changing the 12V Battery
(page 234).
Lift the release lever at the rear of the cover
to remove it.
High Current Fuse Box
E206158
Your vehicle has a pre-fuse box located in
the engine compartment below the engine
compartment fuse box. This box contains
several high current fuses. If replacement
of these high current fuses is required, see
an authorized dealer.
Everest (TEC), EB3B-19G219-YAA enAUS
Fuses
Passenger Compartment Fuse Box
E206167
The fuse box is located behind the access
cover on the outboard side of the steering
column.

CHANGING A FUSE

Do not modify the electrical system
of your vehicle in any way. Have
repairs to the electrical system and
the replacement of relays and high current
fuses carried out by an authorized dealer.
Switch the ignition and all electrical
equipment off before attempting to
change a fuse.
Always replace a fuse with one that
has the specified amperage rating.
Using a fuse with a higher amperage
rating can cause severe wire damage and
could start a fire.
204
WARNINGS