Handset Power On/Off - SoftBank 823P User Manual

Handset Power On/Off

Press and hold
1
Start-up window and waterproofing
precautions appear, and handset enters
Standby.
Enter PIN to verify user each time
handset is turned on (
Press for 2+ seconds
2
Handset shuts down.
The First Time 823P Powers Up, and Setup Window Appears...
Select YES , and set the following:
Each item can be set separately.
Set date and time (Date & Time) (
①
Set Phone Password
②
Enter "9999", and enter new Phone Password (4-8 digits). (
Set Key Tone
③
Select ON or OFF . ( P.18-2)
Set font size
④
Set Display font size all at once. (
P.12-2).
Standby
P.18-6)
P.1-23)
P.18-5)
Note
If USIM not inserted After power-off Insert USIM appears, clean
and properly re-insert USIM Card then restart 823P.
After a period of inactivity, Display turns off.
Retrieving Network Information
When , , or is pressed for the first time in Standby,
823P initiates Network Information retrieval;
Update Network Information to use messaging, Internet, etc.
Update Network Information manually:
Connectivity Retrieve NW Info
to retrieve it.
Main Menu Settings
1
1-15