Declaration Of Conformity - SoftBank 823P User Manual

European RF Exposure Information
Your mobile device is a radio transmitter and receiver. It is designed
not to exceed the limits for exposure to radio waves recommended
by international guidelines. These guidelines were developed by the
independent scientific organization ICNIRP and include safety margins
designed to assure the protection of all persons, regardless of age and
health.
The guidelines use a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR
value for this device when tested at the ear was 0.434 W/ kg*. As mobile
devices offer a range of functions, they can be used in other positions, such
as on the body as described in this user guide**. In this case, the highest
tested SAR value is 0.372 W/kg. As SAR is measured utilizing the devices
highest transmitting power the actual SAR of this device while operating is
typically below that indicated above. This is due to automatic changes to the
power level of the device to ensure it only uses the minimum level required
to reach the network.
The World Health Organization has stated that present scientific
information does not indicate the need for any special precautions for the
use of mobile devices. They note that if you want to reduce your exposure
then you can do so by limiting the length of calls or using a hands-free
device to keep the mobile phone away from the head and body.
*The tests are carried out in accordance with international guidelines for
testing.
** Please see Electromagnetic Waves on page xvii for important notes
regarding body worn operation.
xviii

Declaration of Conformity

We, Panasonic Mobile Communications Development of Europe
Ltd., declare that SoftBank 823P conforms with the essential and
other relevant requirements of the directive 1999/5/EC.
A declaration of conformity to this effect can be found at
http://panasonic.net/pmc/support/index.html
This product is only intended for sale in Japan.
Compliance to the European RTTE directive applies to: SoftBank
823P handset, Battery (PMBAJ1) and AC Charger (SoftBank ZTDAA1).
Handset Care
If handset is left with no battery or an exhausted one, data may
be altered/lost. SoftBank is not liable for any resulting damages.
Use handset within temperatures of 5°C to 35°C and humidity
35% to 90% (within 36ºC to 40ºC for temporary use in a place
such as bathroom). Avoid extreme temperatures/direct sunlight.
Handset may become warm during use or charging. This is not
malfunction.
Exposing lens to direct sunlight may damage color filter and
affect image color.
Soiled terminals may cause poor connection. If the terminals
are dirty, use a dry cloth or cotton swab to wipe them clean.
Clean handset with dry, soft cloth. Using alcohol, thinner, etc.
may damage it.
Avoid forceful rubbing or scratching handset displays.
823P is not completely waterproof. Be sure to observe the
followings:
• Use handset with External Port Cap and Battery Cover tightly
closed. Failing to do so may result in malfunction.