Osaifu-Keitai Settings; Ic Card Status; Interface Settings - SoftBank 823P User Manual

Activating Remote Lock
Call 823P from one of the specified numbers
1
(Send Caller ID)
Hang up after 823P receives the call
2
Repeat Steps 1-2 until specified number of incoming
3
calls is reached (within three minutes)
After specified number of incoming calls, IC Card Lock is set and a
message informs you IC Card Lock is activated.
Note
When setting IC Card Lock, call 823P from the same specified phone
number. Incoming calls from different phone numbers cannot be
counted.
Specified incoming calls may not be counted when Call Forwarding is
active.
Remote Lock is not available when ring time for Answer Phone is set to
0 or Driving Mode is active.
®
Osaifu-Keitai

IC Card Status

Main Menu Tools Osaifu-Keitai
IC Card Status
1

Interface Settings

Set handset response to commands from reader/writer.
Main Menu Tools Osaifu-Keitai
Interface Settings
1
Select an item
2
Browser : Activate Internet
S! Appli : Activate S! Appli
Messaging : Activate Messaging
Vibration : Vibrate handset
Pop-up Message : Open messages
On or OFF
3
Settings
IC Card Settings
<Default> All ON
IC Card Settings
Enter Phone Password
17
17-5