Edge Products Juice Attitude CTS2 User Manual page 59

The Mileage Cost is a calculated
average based on how many
miles you have traveled and the
Fuel Price you entered.
The Trip Cost is calculated
from the Fuel Price and the
Trip Odometer values.
There are two ways to display
the Mileage Coach PID:
Show Difference
Displays the difference
between Instantaneous
and Average fuel mileage.
Show Values
Displays as: Instantaneous | Average.
STEP 4 - Refer to the Individual Gauge Set Up section of this
manual to display one or all three Mileage Coach PIDs on the
main gauge screen.
Mileage Average displays the calculated average MPG or L/100km and is up-
dated continuously while driving. The average is calculated only when the PID
is being displayed on the main Gauge Screen. This value will typically change
more during start/stop driving, and less on the highway.
Mileage Instantaneous - shows a conscientious driver how to vary the pres-
sure on the gas pedal to save fuel every second. The value is displayed in
either MPG or L/100km.
Mileage Coach - takes the Average and Instantaneous values mentioned above
and creates a visual tool to help maximize your fuel economy. This PID is best
viewed using one of the Analog Gauge locations.
The Fuel Price is used to
calculate your Mileage and
Trip Costs.
Mileage Coach
Fuel Price: $
Mileage Cost: $
Trip Cost: $
Mileage Coach Display
Mileage Driving Tips
Mileage Driving Tips
are intended to give
you general information
regarding driving habits
or anything that will
help maximize your fuel
economy and overall
driving experience.
Mileage Coach
0.00
0.00
1250
59