Speed Limiter; Axle Ratio - Edge Products Juice Attitude CTS2 User Manual

Speed Limiter

NOTE: Depending on your make and model the following features
may or may not be available for your vehicle.
This option allows you to set the maximum speed of your vehicle.
Use the UP/DOWN arrows
to adjust the MPH, then
press Enter.
WARNING: Removal/adjustment of the factory speed limiter is intended
for use at a closed circuit, legally sanctioned racing environment. If you
drive on public roads after removal or adjustment of the speed limiter, you
must still obey all driving laws, including adhering to posted speed limits.
To drive at racing speeds on public roads seriously endangers you, your
passengers, and others nearby. Also it is your responsibility to ensure
your tires and other vehicle components are rated to travel at increased
speeds. Driving at high speeds with inadequate tires or other components
can lead to serious or fatal injury.
Caution: Removing/adjusting the speed limiter for purposes inconsistent
with the products's intended function violates the product's intended use
and will invalidate the product's warranty. Edge Products is not respon-
sible for, or liable for the consequences of improper product use.

Axle Ratio

Caution: This feature should only be used if you have replaced
the stock Axle.
This option allows you to adjust the
calculated output shaft speed.
Use the UP/DOWN arrows
to adjust the ratio, then
press Enter.
Spd Limiter
Spd Limiter: 75 MPH
EXIT ENTER
Axle Ratio
3.75
EXIT ENTER
Juice Control
37