Specifications; Protecting The Environment - DeWalt DCD790 Instruction Manual

CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect the charger from the AC
outlet before cleaning. Dirt and grease may be removed from the
exterior of the charger using a cloth or s oft non-metallic brush. Do
not use water or any cleaning solutions.
Accessories
WARNING: Since accessories, other than those offered by
D WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the risk of
injury, only D WALT, recommended accessories should be used with
E
this product.
Recommended accessories for use with your tool are available at extra
cost from your local dealer or authorized service center.
MAXIMUM RECOMMENDED CAPACITIES
DCD790
WOOD
Auger 7/8" (22 mm)
Paddle 1-1/4" (32 mm)
Twist 1/2" (13 mm)
Self-feed 1-3/8" (35 mm)
Hole saw 2" (50 mm)
METAL
Twist 1/2" (13 mm)
Hole saw 1-3/8" (35 mm)
MASONRY
Carbide –
Repairs
The charger and battery pack are not serviceable.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
personnel, always using identical replacement parts.

Protecting the Environment

Separate collection. This product must not be disposed of
with normal household waste.
Should you find one day that your D
replacement, or if it is of no further use to you, do not dispose of it
with household waste.
DCD795
Local regulations may provide for separate collection of electrical
products from the household, at municipal waste sites or by the
retailer when you purchase a new product.
7/8" (22 mm)
D WALT provides a facility for the collection and recycling of D
E
1-1/4" (32 mm)
products once they have reached the end of their working life. To take
1/2" (13 mm)
advantage of this service please return your product to any authorized
1-3/8" (35 mm)
service center that will collect them on our behalf.
2" (50 mm)
You can check the location of your nearest authorized service center
by contacting your local D
listing is included in the packaging of this product.
1/2" (13 mm)
1-3/8" (35 mm)
DCD790
DCD795
1/4" (6.5 mm)
* Maximum initial battery voltage (measured without a workload) is
20 volts. Nominal voltage is 18V.
45
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled
materials helps prevent environmental pollution and reduces
the demand for raw materials.
WALT office. Alternatively, a service center
E

SPECIFICATIONS

20V Max* 0–600/min; 0–2000 RPM
20V Max* 0–600/min; 0–2000 RPM
0-10200; 0–34000 BPM
WALT product needs
E
WALT
E