Using The Self-Timer - Canon PowerShot A495 Getting Started

Using the Self-Timer

The self-timer can be used to shoot a group photo that includes the
photographer. The camera will activate approximately 10 seconds after the
shutter button is pressed.
You can change the delay time and number of shots (p. 68).
Downloaded From camera-usermanual.com Canon Manuals
Press the p button.
1
Choose Ò.
2
●
Press the op buttons to choose Ò, then
press the m button.
X
Once set, Ò will appear on the screen.
3 Shoot.
●
Press the shutter button halfway to focus on
the subject, then press it fully.
X
When the self-timer starts, he lamp blinks
and the self- imer sound plays.
X
Two seconds before the shutter releases,
the lamp and sound speed up (the lamp
remains lit when the flash will fire).
●
To cancel shooting with the timer after
countdown has started, press the p button.
●
To restore the original setting, choose
Step 2.
in
57