Maintenance Instructions; Moving And Storage Instructions; Troubleshooting - Schumacher Electric SP1 Owner's Manual

13. MAINTENANCE INSTRUCTIONS

13.1 After use and before performing maintenance, unplug and
disconnect the battery charger (see sections 6, 7 and 8).
13.2 Use a dry cloth to wipe all battery corrosion and other dirt or oil
from the battery clips, cords, and the charger case.
13.3 Ensure that all of the charger components are in place and in
good working condition, for example, the plastic boots on the
battery clips.
13.4 Servicing does not require opening the unit, as there are no user-
serviceable parts.
13.5 All other servicing should be performed by qualified service
personnel.

14. MOVING AND STORAGE INSTRUCTIONS

14.1 Store the charger unplugged, in an upright position. The cord will
still conduct electricity until it is unplugged from the outlet.
14.2 Store inside, in a cool, dry place (unless you're using an on-board
Marine Charger).
14.3 Do not store the clips on the handle, clipped together, on or
around metal, or clipped to cables.
14.4 If the charger is moved around the shop or transported to another
location, take care to avoid/prevent damage to the cords, clips
and charger. Failure to do so could result in personal injury or
property damage.

15. TROUBLESHOOTING

PROBLEM
Battery clips do not
spark when touched
together.
POSSIBLE CAUSE
The charger is
equipped with an
auto-start feature.
It will not supply
current to the battery
clips until a battery is
properly connected.
The clips will not spark
if touched together.
• 13 •
REASON/SOLUTION
No problem; this is a
normal condition.