Scan Function; Skip Blanks - Mercedes-Benz Comand Operator's Manual

Scan function

The tracks on a tape can be scanned one
after the other for 8 seconds each if there
is enough blank tape separating the
individual tracks (approx. 3 seconds).
Activate the Tape main menu
( page 40).
Press the Scan soft key.
The next track is searched. The track
will be played for 8 seconds.
i
At the end of the tape, the tape will
automatically switch to the other side
and scan will continue.
To stop the function, briefly press the
Scan soft key.
Playback begins.

Skip blanks

In the Tape main menu, press the
Setting soft key.
The Setting menu will appear.
Option Symbol
Q
Function active
q
Function not active
Tape operation
Press E.
The function is activated or
deactivated.
You will see the Tape main menu
automatically after 8 seconds
if you press the Back soft key.
Audio
43