Tape Operation; Notes On Tape Care; Switching Tape Operation On - Mercedes-Benz Comand Operator's Manual

Audio

Tape operation

Tape operation

Notes on tape care

Warning
In order to avoid distraction which could
lead to an accident, the driver should insert
tapes with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 50 feet (approximately 14 m)
every second.
Do not expose the tapes to direct
sunlight or high temperatures.
Do not leave tapes near magnetic fields
or magnets.
Ensure that the tape is adequately
tightened before you insert it into the
tape slot.
40
Do not touch the tape with your fingers.
Do not insert a tape if its label is not
G
stuck on properly.

Switching tape operation on

Press A.
The Audio menu will appear
( page 30).
Press the soft key.
Tape
The Tape main menu will appear.
Tape main menu
i
The soft key will appear if the
Sound
COMAND is provided with sound
functions* ( page 27).
E.g.:
= Tape operation switched on
Tape
= Side display
Side 1
Tape inserted:
Tape operation begins with the track
last played.
i
The telephone and navigation functions
can be used while a tape is playing.
No tape inserted:
The message No tape will appear.
Insert a cassette ( page 41).
In the case of a device or tape error:
The message Tape error will appear.