Problems With The Projector - Acer P1101/P1101C/P1201/P1201B/P1201i Series User Manual

Problems with the Projector

#
1
2
Downloaded From projector-manual.com Acer Manuals
Condition
The projector stops responding
to all controls
Lamp burns out or makes a
popping sound
Solution
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
When the lamp reaches the end of its useful
life, it will burn out and may make a loud
popping sound. If this happens, the projector
will not turn on until the lamp module has
been replaced. To replace the lamp, follow
the procedures in the "Replacing the Lamp"
section.
47