Table of Contents
Advertisement
9
10
11
Problems with the Projector
#
1
Downloaded From projector-manual.com Acer Manuals
Image is too small
•
or too large
•
•
Image has slanted
•
sides
•
Image is reversed
•
Condition
The projector stops responding
to all controls
Adjust the zoom ring on the top of the projector.
Move the projector closer to or further from the
screen.
Press "MENU" on the remote control or on the
control panel. Go to "Image --> Aspect Ratio" and
try different settings.
If possible, reposition the projector so that it is
centered on the screen.
Press the "Keystone
/
remote control until the sides are vertical.
Select "Image --> Projection" on the OSD and adjust
the projection direction.
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
" on the OSD or the
Solution
29
Advertisement
Table of Contents
