Power/Activity Led; Registering Your Drive; Handling Precautions - Western Digital My Passport Ultra User Manual

USB 3.0 Interface Port

Power/Activity LED

Figure 2. My Passport Ultra Drive
Power/Activity LED
The power/activity LED shows the drive's power state as follows:
LED Appearance
On steady
Fast flashing, approximately 3 times per second
Slow flashing, approximately every 2.5 seconds

Registering Your Drive

Always register your My Passport Ultra drive to get the latest updates and special offers.
You can easily register your drive using the WD Drive Utilities software, as described in
"Registering the Drive" on page 31. Another way is to register online at
http://register.wd.com.

Handling Precautions

WD products are precision instruments and must be handled with care during unpacking
and installation. Rough handling, shock, or vibration can damage drives. Always observe
the following precautions when unpacking and installing your external storage product:
Do not drop or jolt the drive.
Do not move the drive during activity.
Power State/Activity
Idle
Activity
System standby
ABOUT YOUR WD DRIVE – 4
MY PASSPORT ULTRA
USER MANUAL