Dahua MPT300 User Manual
  1. Manuals
  2. Brands
  3. Dahua Manuals
  4. Touch terminals
  5. MPT300
  6. User manual
Dahua MPT300 User Manual

Dahua MPT300 User Manual

Mobile portable terminal
Hide thumbs
Table of Contents

Advertisement

Quick Links

Mobile Portable Terminal
User's Manual
Version 1.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MPT300 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dahua MPT300

Summary of Contents for Dahua MPT300

  • Page 1 Mobile Portable Terminal User’s Manual Version 1.0.0...

  • Page 2: Table Of Contents

    Table of Contents Product Introduction ....................1 1.1 Overview ......................1 1.2 Specifications ..................... 1 1.3 General Structure ....................1 MPT Operation ......................4 2.1 Boot up and Shut down ..................4 2.2 Login ........................4 2.3 Main Interface ....................4 2.3.1 Status bar ....................
  • Page 3 4.2 DSS ........................57 FAQ ..........................59 Appendix Toxic or Hazardous Materials or Elements ........... 63...
  • Page 4 Welcome Thank you for purchasing our mobile portable terminal! This user’s manual will help you become familiar with our mobile portable terminal in a very short time. Before installation and operation, please read the following safeguard and warning carefully! Important Safeguard and Warning 1．Electrical safety All installation and operation here should conform to your local electrical safety codes.

  • Page 5: Product Introduction

    1 Product Introduction 1.1 Overview This series product is a mobile portable terminal for persons of public security, insurance, traffic police and etc. It can realize audio/video record, snapshot, GPS, and video surveillance, record view and download, bidirectional talk, emergency command via 3G/4G/WIFI and etc. The system is designed based on the Android OS.
  • Page 6 Please refer to the following figure for general structure information. See Figure 1-1 through Figure 1-3. Figure 1-1 Figure 1-2...
  • Page 7 Figure 1-3...

  • Page 8: Mpt Operation

    2 MPT Operation 2.1 Boot up and Shut down Press the power button on the right side of the device (see Figure 1-2), you can boot up or shut down the device. 2.2 Login After system boots up, you can go to the following interface. See Figure 2-1. Input user name and password;...

  • Page 9: Status Bar

    Figure 2-2 2.3.1 Status bar It is to display system information, notice, display network connection status, platform connection and etc. Please refer to the following sheet for detailed information. Icon Note Display battery voltage. Display storage card usage status. Orange: It is in use. ...

  • Page 10: Menu

    Click the status bar and move down, you can see the shortcut button such as WIFI, Bluetooth, GPS, data, prompt information and etc. See Figure 2-3. Figure 2-3 The red color means current function is enabled, the grey color means current function is disabled.

  • Page 11: Record Audio

    Figure 2-4 Please refer to the following sheet for detailed information. Icon Function Click it, system begins snapshot. Switch snapshot/record video. Click it, system begins record video. During the record process, you can click to snapshot. Adjust image distance (Near->Far) Click it to view image or video record file.

  • Page 12: Files Manage

    Figure 2-5  Click to begin record. The circle becomes red during the recoridng process. Click it again to stop record.  Click to view audio file. 2.6 Files Manage Note Admin user can view files of all users. For ordinary user, he can only view his own files. ，...
  • Page 13 Figure 2-6 a) Click file type you want to search (image/video/audio), you can view the folder. b) Click the folder, you can view the file.  Press the file for a long time; you can see an icon shown as at the top right of the image.
  • Page 14 Figure 2-7 Use you finger to press left/right on the screen, you can view the previous/next image.  Click to return the image file list.  Click to snapshot.  Click to delete the image. Figure 2-8...

  • Page 15: Settings

    Please refer to the following sheet for detailed informaiton. Name Function Record It is to record a video file. Slow play It max supports 1/4X slow play speed. Play Play or pause. Fast play It max supports 4x play speed. Play process bar Current file play speed and play time.
  • Page 16 Figure 2-10 Click an item to go to the corresponding interface.  means current function is disabled.  means current function is enabled. 2.7.1.1 WIFI Here you can search or add WIFI network. Click , you can go to the following interface. See Figure 2-11.
  • Page 17 Figure 2-11 2.7.1.2 WPS WPS (Wi-Fi Protected Setup) is used for the router of the WPS function. After you enabled this function, the device can quickly connect to the network. Click to view the router of the WPS function. You can follow the pop-up interface to set and then connect to the network.
  • Page 18 Figure 2-12 Please refer to the following sheet to set the detailed parameters. Name Function The router SSID you want to connect to (It is the WIFI network SSID name). N/A: There is no need to input password when you login the WIFI Security network.
  • Page 19 Click , you can view two options:scan/advanced.  Scan: Click it to search all WIFI networks.  Advaced. Click it, the interface is shown as below. See Figure 2-13. Figure 2-13  Check button, you can be informed when there is network available.
  • Page 20 Figure 2-14  Click WIFI frequency, you can select specified frequency range. See Figure 2-15.  Auto: Auto search router frequency.  For 5Hz frequency: Only search 5Hx router.  For 2.4Hz frequency: Only search 2.4Hx router. Note Right now, device supports 2.4Hz only. It does not support 5Hz.
  • Page 21 Figure 2-15 You can go to the advanced interface to view the connected Ethernet card MAC address and network IP address. 2.7.1.5 Bluetooth You can use Bluetooth to receive the file. Click , you can go to the following interface to enable Bluetooth function. See Figure 2-16.
  • Page 22 Figure 2-16 Important  When it says”Not visible to other Bluetooh devices”, the other device can not search the device.  When it says “Visible to other Bluetooh devices”, the other device can search the device.  When it says” Visible to other paried Bluetooh devices”, only the paried device to detect the device.
  • Page 23  Detect time setup: It is to stop the detect after the specifed period if there is no detected device. 2.7.1.6 Data Click to enable data business. You can go to the following interface. See Figure 2-17. Figure 2-17 2.7.1.7 Data usage Click data usage, you can see the flow usage information.
  • Page 24 Figure 2-18 You can set flow threshold here. Drag the line on the screen to set the threshold value and then warning line.  Warning line: Once the flow has reached the warning line, system can generate an alarm to alert you.
  • Page 25 Figure 2-19 2.7.1.7.2 Mobile network Click mobile network, you can go to the following interface to set. See Figure 2-20.
  • Page 26 Figure 2-20  Check the enabled data flow; you can use the mobile network to upload/download data.  Check the mobile data roaming; you can connect to the mobile data network service when you are roaming.  Click connection name (APN), you can set APN. APN (Access Point Name) is the parameter you need to set on the cell phone.
  • Page 27 Figure 2-21 Click it, you can go to the change APN setup interface to modify the setup. Click the on the right corner and then click the Save button. Please note, for SIM card from different operators, the APN setup may vary. The system adopts the default setup after you inserted the SIM card.

  • Page 28: Devices

    Figure 2-22 2.7.1.9 Ethernet This function shall work with the pedestal (not provided), you can use the network port on the pedestal to connect to the network. 2.7.2 Devices From Settings->Devices, you can go to the following interface. Here you can set camera, platform, account, camera storage parameters.
  • Page 29 Figure 2-23 2.7.2.1 Camera From Settings->Device->Camera, you can go to the camera interface. See Figure 2-24.
  • Page 30 Figure 2-24 2.7.2.1.1 Snapshot It is to set snapshot quality, WDR, size. See Figure 2-25.
  • Page 31 Figure 2-25 Please refer to the following sheet for detailed information. Name Functions Image quality It includes normal, fine and super fine. WDR function can enhance the brightness of the dark section and lower the brightness of the high light section so that the both sections can be clear at the same time.
  • Page 32 Figure 2-26 Please refer to the following sheet for detailed information. Name Functions Video quality The higher the resolution is, the good the video quality is. But at the same time, the storage space is large. 1080P（1920×1080）  720P（1280×720）  D1（720×576）...
  • Page 33 Figure 2-27 Please refer to chapter 2.7.2.1.3 for detailed information. 2.7.2.1.4 It is to set enable/disable OSD function or not. After you enabled this function, you can overlay corresponding time, user name, GPS information on the image or video. See Figure 2-28.
  • Page 34 Figure 2-28 2.7.2.2 Platform MPT can connect to the DSS platform. You can control and manage MPT device remotely via DSS. From Settings->Device->Platform, you can go to the platform interface. See Figure 2-29.
  • Page 35 Figure 2-29 Please refer to the following sheet for detailed information. Name Function Connection state Enable or disable the device to connect to the platform. Device ID It is the name of the device on the platform. Please make sure the name here is the same on that on the platform.
  • Page 36 Figure 2-30 Figure 2-31 2.7.2.3.1 Account Click account button, you can go to the user list interface. See Figure 2-32.
  • Page 37 Figure 2-32 Important Only the admin user has the user manage rights and can add user and set new user authorities. Click the admin user; you can go to the user information interface. Here you can search user information, modify rights, modify password, add/delete fingerprint and etc. Follow the steps listed below to add new user.
  • Page 38 Figure 2-33 Input user name, password, confirm password, memo and then set rights. Tips The authorities are not displayes in one screen. Use you finger to press down the screen to view more options. Click OK button to complete the setup. After you successfully added a new user, you can go to the user list and then click it, now you can go to the followin interface to set its memo and authorties.
  • Page 39 Figure 2-34 2.7.2.3.2 Personal information  For admin account, it can search personal information, change admin password, add/delete fingerprint. See Figure 2-35.  For general user, you can search current account information.
  • Page 40 Figure 2-35 Click password, you can go to the password setup interface to change password and manage fingerprints. 2.7.2.3.3 Fingerprint module Note This function is for admin only. It is to manage fingerprint module storage space, format fingerprint of corresponding user. See Figure 2-36.
  • Page 41 Figure 2-36 2.7.2.3.4 Password You can change current login user password. See Figure 2-37.
  • Page 42 Figure 2-37 2.7.2.3.5 Fingerprint manager Each user can max scan two fingerprints. You can scan your finger to login after you saved it. Click finger manage, you can go to the following interface. See Figure 2-38.
  • Page 43 Figure 2-38 Follow the prompts to scan the fingerprint. See Figure 2-39. Figure 2-39...

  • Page 44: System

    Put your corresponding fingerprint on the sensor (Refer to Figure 1-1 for detailed position), move from the top to the down. Follow the prompts on the process bar and then stop movement. See Figure 2-40. Figure 2-40 Click Ok button, now the fingerprint scan is complete. On the fingerprint list, the scanned fingerprint is shown as red.
  • Page 45 Figure 2-41 2.7.3.1 Display Click , you can go to the following interface. See Figure 2-42. It is for you to adjust screen brightness, sleep time and etc.
  • Page 46 Figure 2-42 2.7.3.2 Battery Click , you can go to the following interface. See Figure 2-43. It is for you to view current battery voltage and usage time...
  • Page 47 Figure 2-43 2.7.3.3 Language and Input Method It is for you to set system language and input method. Click , you can go to the following interface. Here you can set language type and keyboard. See Figure 2-44.
  • Page 48 Figure 2-44 2.7.3.4 Default It is to restore factory default setup. Click , youc can go to the following interface. See Figure 2-45.
  • Page 49 Figure 2-45 Click reset device button, system begins restoring factory default setup. Factory test 2.7.3.5 The factory test interface is shown as below. See Figure 2-46.
  • Page 50 Figure 2-46 Click Start Test button, you can test each item on the list one by one. Click the corresponding item; you can test the selected one. 2.7.3.6 Date and Time It is for you to set device date and time. Click , you can go to the following interface.
  • Page 51 Figure 2-47 Check the box to select auto set date and time, device can sync time with the network. Important Please make sure the network connection is OK (such as 3G, 4G, WIFI and etc) if you want to use network sync function. 2.7.3.7 About Device In this interface, you can view device status, type, SN and version.
  • Page 52 Figure 2-48 Please refer to the following sheet for detailed information. Name Function Battery status Current battery status such as power consumption, recharging status and etc. Battery voltage Current battery voltage. Network Current using network type such as CDMA. Signal intensity Network signal intensity Mobile Network type Data network type such as CDMA-EvDo rev.A：6.

  • Page 53: Log Manager

    Running time The system running time after it booted up. 2.8 Log Manager It is to search log information. Click , you can go to the following interface. See Figure 2-49. Figure 2-49 It is to display log type information. ...

  • Page 54: Alarm

    2.10 Alarm On the right of the side pane, there is an alarm button. After you connected the device to the platform, it can upload the alarm information to the platform. System can generate an alarm and save the log once it vibrates or fell down. You can view the alarm on the billboard once there is an icon .
  • Page 55 On the main interface, move the screen to go to the second page, click , you can go to the calendarr interface.

  • Page 56: Upgrade

    3 Upgrade Before you use the upgrade function, from the main interface->Settings->Device- >Platform settings, please enable the platform function, and the local port shall be 37777. You can use the upgrade tools included in the resources CD to update the device. Open the upgrade tool, you can go to the main interface, click .
  • Page 57 Figure 3-3 Click logout on the left pane, you can disconnect the software and then upgrade device. Clic button to select the software and then click button. Now you can view the following interface during the upgrade process. See Figure 3-4. Figure 3-4 You can view the following icon on the MPT.
  • Page 58 Figure 3-6 Now you can see the following interface, please click OK button. See Figure 3-7.
  • Page 59 Figure 3-7 System needs to reboot to complete the upgrade process.

  • Page 60: Platform Connection

    4 Platform Connection You can control and manage MPT device via DSS. 4.1 MPT Please follow the steps listed below. Please make sure the network connection is OK and MPT device is online so that it can be added to the platform. On the MTP device, from Settings->Device->Platform, you can go to the following interface to input parameters.
  • Page 61 4.2 DSS Please follow the steps listed below to login the DSS. Login DSS manager end and then from General->Device->Device->Encoder, and then click Add button, you can see the following interface. See Figure 4-2. Figure 4-2 Please refer to the following sheet for detailed information. Item Function Add Type...
  • Page 62 Device name Input customized device name. Device type Please select mobile portable terminal from the dropdown list. Video channel The value is 1. Alarm input channel The value is 1. Click OK button to complete the add process.
  • Page 63 5 FAQ Login Q: For the new user, I want to know the default account. A: The default user name is admin and the password is 123456. Q: How to delete the App from the third party. A: Press the App icon on the screen for a long time and then you can see a delete icon. Click it to delete the App.
  • Page 64 A: From setting->data->Mobile network->Connection name (APN), change APN name password (Please contact your operator for the name and password). For the rest items you can use default setup. Click Save button. Q: GPS function is null. A: Take the device to the outside environment, open GPS for about one minute and a half. You can see the GPS function is valid now.
  • Page 65 A: Check the 3G/4G/WIFI network connection is OK or not. Check the auto register device ID is the same as the platform setup or not. Check platform address, port setup and etc. Check platform user name and password is right or not (device default user name is admin and password is 123456.) Q: The platform cannot open the bidirectional talk function.
  • Page 66 A: Make sure the light condition is good and then put the plate on the rectangle of the interface to snap. Q: Device can not indicate the south and north direction. A: Hold you device and then move hand to draw “8”. Q: Camera video is not clear.
  • Page 67 Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Structural ○ ○ ○ ○ ○ ○ Member ○ ○ ○ ○ ○ ○ Circuit Board Internal Wire ○ ○ ○ ○ ○...

Table of Contents