Table of Contents
Advertisement
Lower Split Point setting
This setting is used to change the point at which the lower and upper sections are divided, allowing the size of each section to be
increased or decreased freely.
* The default split point is set to G2.
Lower section
When ACC is enabled:
Press and hold the ACC button for two seconds.
The LED indicator for the ACC button will start to flash.
Press the
or
MENU buttons until the Lower Split Point
setting screen is shown in the LCD display.
4. Lower Split Point
= G2
Press the
or
VALUE buttons or press a key on the keyboard
to change the Lower Split Point setting.
Press the ACC button again to return to the Style screen.
* The adjusted Lower Split Point setting can be stored to the KCP90's
Registration memories. Please refer to page 22 for more information.
5
1-2 Play
The 1-2 Play feature provides a pre-programmed panel setup with appropriate sounds and settings for the
selected style.
Turning the 1-2 Play function on/off
Press the 1-2 PLAY button.
The LED indicator for the 1-2 PLAY button will turn on to
indicate that the function is enabled, and suitable sounds and
settings for the current style will be selected automatically.
Guitar Ballad
F
Press the 1-2 PLAY button again to turn the function off.
Default split point (G2)
Π=
80
Upper section
Method 1:
Method 2:
29
Advertisement
Table of Contents
