Kawai KCP90 Owner's Manual page 51

4. Connecting the pedal cable and
AC/DC adaptor
Connect the pedal cable to the PEDAL terminal located on the
underside of the main body.
Connect the AC/DC adaptor e to the DC IN terminal.
Use the binders to fix the cables in place.
* Note the direction
Binder
5. Adjusting the pedal support bolt
Turn the pedal support bolt anti-clockwise until it makes
contact with the floor and supports the pedals firmly.
Binder
When moving the instrument, always adjust or
remove the pedal support bolt, then readjust
when the instrument is in its new position.
51