We Recommend Safety First - Sage the Scraper Mixer Pro BEM800UK Instruction Booklet

Hide thumbs Also See for the Scraper Mixer Pro BEM800UK:
Table of Contents

Advertisement

WE RECoMMENd SaFEty FIRSt

PAge heAder.....
Carefully read all
instructions before operating
the bench mixer for the first
time and save for future
reference.
Remove and safely discard
any packaging material and
promotional labels before
using the bench mixer for the
first time.
To eliminate a choking
hazard for young children,
remove and safely discard the
protective cover fitted to the
power plug of this appliance.
Do not place the bench mixer
near the edge of a bench
or table during operation.
Ensure the surface is level,
clean and free of water and
other substances. Vibration
during operation may cause
the appliance to move.
Do not use the bench mixer
on a sink drain board.
Do not place the bench
mixer on or near a hot gas or
electric burner, or where it
could touch a heated oven.
Always ensure the bench
mixer is completely
assembled before operating.
Follow the instructions
provided in this book.
4
Ensure the speed control
dial is in the OFF position
and the bench mixer is
switched off at the power
outlet and the power cord is
unplugged before attaching
the beater, whisk or
dough hook.
Do not use attachments other
than those provided with the
bench mixer. Use only the
beater whisk and dough hook
supplied with the mixer.
The maximum dough this
machine can mix is 600
grams flour plus 375ml
water. If your recipe is more
than this, machine must be
rested after 3 minutes of
use to avoid overloading the
motor.
Do not operate the appliance
continuously on heavy loads
for more than 3 minutes.
None of the recipes in this
book are considered a
heavy load.
Handle the bench mixer and
attachments with care. Never
place your fingers inside
the mixing bowl or near the
beater, whisk or dough hook
during operation.
WE RECoMMENd SaFEty FIRSt
PAge heAder.....
Keep hands, hair, clothing,
as well as, spatulas and other
utensils away from moving
beater, whisk or dough hook
during operation.
Should an object such as a
spoon or spatula fall into
the bowl while mixing,
immediately ensure the
speed control dial is in the
OFF position, turn the bench
mixer off, unplug at the power
outlet and remove the object.
Do not place hands in the
mixing bowl unless the bench
mixer is disconnected from
the power outlet. Ensure the
speed control dial is in the
OFF position, the bench
mixer is switched off and
unplugged from the power
outlet before removing the
beater, whisk or dough hook.
Ensure the motor and
beater, whisk or dough hook
have completely stopped
before disassembling.
Always remove the
beater, whisk or dough
hook from the bench mixer
before cleaning.
Care should be taken when
removing the food from
the mixer bowl by ensuring
the motor and the beater,
whisk, or dough hook have
completely stopped before
disassembling. Ensure the
speed control dial is in the
OFF position, the appliance
is switched off at the power
outlet and unplugged before
unlocking the mixer motor
head and moving into the
upright position. The beater,
whisk or dough hook should
be released from the mixer
motor head before removing
the processed food from the
mixer bowl and the beater,
whisk or dough hook.
Ensure the mixer motor head
is locked into the horizontal
(closed) position when not in
use and before storing.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents