Intex Krystal Clear 638G Owner's Manual page 6

SETUP
Position this product away from the pool, so as to prevent children from
climbing on it and accessing the pool.
To inspect and change the filter cartridge, disconnect line cord, unscrew the pool inlet nozzle (10)
and strainer grid (11) from the strainer connectors and insert the hat-like plugs into the strainer
connectors before servicing the filter. After service, open the air release valve, remove the plugs,
allow any air to escape through the valve before tightening the valve again and replace the pool
inlet nozzle (10) and strainer grid (11). The pump is now primed with water again and may be
turned on.
THREADED
COVER
FILTER
CARTRIDGE
INSIDE
UPPER PUMP
CONNECTION
LOWER PUMP
CONNECTION
TRANSFORMER
The installation instruction shall provide information on requirements specified for the electrical
installation and shall include reference to national wiring rules.
SAVE THESE INSTRUCTIONS
(106GS) MODEL 638G FILTER PUMP ENGLISH 7.5" X 10.3" PANTONE 295U 06/28/2014
INSTRUCTIONS (continued)
WARNING
UPPER PROTRUDING
HOSE CONNECTION
AIR RELEASE
VALVE
HOSE
HOSE CLAMP
(ILLUSTRATION NOT TO SCALE)
English
WATER LEVEL
POOL INLET
NOZZLE
(REMOVE)
PLUG
STRAINER GRID
(REMOVE)
INSIDE OF POOL
Page 6
106
GS