Common Pool Problems; General Aquatic Safety - Intex Krystal Clear 638G Owner's Manual

Filter pump 12 v~, 50 hz, 8 a hmax 1.0 m, h min 0.19 m, ipx7 max. water temperature 35 °c
Hide thumbs Also See for Krystal Clear 638G:
Table of Contents

Advertisement

COMMON POOL PROBLEMS

PROBLEM
DESCRIPTION
ALGAE
• Greenish water.
• Green or black
spots on pool liner.
• Pool liner is slippery
and/or has a bad odor.
COLORED
• Water turns blue,
brown, or black
WATER
when first treated
with chlorine.
FLOATING
• Water is cloudy or
MATTER IN
milky.
WATER
CHRONIC LOW
• Level is lower than
WATER LEVEL
on previous day.
SEDIMENT
• Dirt or sand on
pool floor.
ON POOL
BOTTOM
• Leaves, insects
SURFACE
etc.
DEBRIS

GENERAL AQUATIC SAFETY

Water recreation is both fun and therapeutic. However, it involves inherent risks
of injury and death. To reduce your risk of injury, read and follow all product,
package and package insert warnings and instructions. Remember, however, that
product warnings, instructions and safety guidelines cover some common risks
of water recreation, but do not cover all risks and or dangers.
For additional safeguards, also familiarize yourself with the following general
guidelines as well as guidelines provided by nationally recognized Safety
Organizations:
• Demand constant supervision. A competent adult should be appointed as a "lifeguard"
or water watcher, especially when children are in and around the pool.
• Learn to swim.
• Take the time to learn CPR and first aid.
• Instruct anyone who is supervising pool users about potential pool hazards and about
the use of protective devices such as locked doors, barriers, etc.
• Instruct all pool users, including children what to do in case of an emergency.
• Always use common sense and good judgement when enjoying any water activity.
• Supervise, supervise, supervise.
SAVE THESE INSTRUCTIONS
(106GS) MODEL 638G FILTER PUMP ENGLISH 7.5" X 10.3" PANTONE 295U 06/28/2014
CAUSE
• Chlorine and pH levels
need adjustment.
• Copper, iron or maganese
in water being oxidized by
the added chlorine.
This is common.
• "Hard water" caused
by a too high pH level.
• Chlorine content is low.
• Foreign matter in water.
• Rip or hole in pool liner or
hoses.
• The drain valves are loose.
• Heavy use, getting in
and out of pool.
• Pool too close to trees.
English
SOLUTION
• Super chlorinate with shock
treatment. Correct pH to your
pool store's recommended level.
• Vacuum pool bottom.
• Maintain proper chlorine level.
• Adjust pH level to the
recommended level.
• Run filter until water is clear.
• Clean cartridge frequently.
• Correct the pH level. Check
with your pool dealer for advice.
• Adjust the chlorine level.
• Clean or replace your filter.
• Repair with a patch kit.
• Finger tighten all caps.
• Use Intex pool vacuum to
clean bottom of pool.
• Use Intex pool skimmer.
Page 11
106
GS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents