Chapter 8 Trouble Shooting; Normal Phenomena - Haier HCM071PA Service Manual

SERVICE MANUAL
Mod el: HCM071PA

Chapter 8 Trouble shooting

8-1. Normal phenomena

Problem
Temperature control in OFF or
Min or 0 position.
Freezer does not
operate or
Freezer is unplugged.
Power-On Light is
not on The
breaker is tripped.
Door/lid left open.
Freezer
Too frequent or too long to
starts/stops too
door/lid openings.
frequently
Temperature control set too
cold.
Door/lid left open.
Too frequent or too long
door/lid openings.
Temperature control set too
Freezer operates
cold.
too long
Inadequate
space around cabinet.
Fast Freeze switch is in the
ON
models)
Floor may be weak, causing
freezer
Noisy operation or compressor is on.
cabinet vibrates
Cabinet
solidly on floor
Door/lid left open.
Freezer
temperature too
warm
Too frequent or too long
door/lid openings.
Temperature control OFF or
Foods defrosting
Min or 0 positions.
Freezer is unplugged.
Possible Causes
fuse is blown/circuit
air circulation
position (on some
to vibrate when
is not positioned
Issue 2013-11-21
Rev.
What To Do
Move the control to a temperature setting.
Push the plug completely into the outlet.
Replace fuse or reset the breaker
Check to see if package is holding door/lid
open.
See About the operation of the freezer
Check to see if package is holding door/lid
open.
See About the operation of the freezer
See Preparing to install the freezer
See About the operation of the freezer
Placing 2 X 4s (51 mm X 102 mm) under the
length of the freezer will help support it and
may reduce vibration.
See Preparing to install the freezer Or use
shims for uneven floor
Check to see if package is holding door/lid
open.
Move the control to a temperature setting.
Push the plug completely into the outlet.
Ref1311S001V0
16