Chapter 9 Trouble Shooting; Normal Phenomena - Haier FMM350HSBSY0 Service Manual

Chapter 9 Trouble shooting

9-1. Normal phenomena

Problem
Freezer does Temperature control
not operate or in OFF or Min or 0
Power-On Light position.
is not on
Freezer is
unplugged.
The fuse is
blown/circuit
breaker is tripped.
Freezer Door/lid left open.
starts/stops too
Too frequent or too
frequently
long to door/lid
openings.
Temperature control
set too cold.
Freezer Door/lid left open.
operates too
long
Too frequent or too
long door/lid
openings.
Temperature control
set too cold.
Inadequate air
circulation space
around cabinet.
Fast Freeze switch is
in the ON position
(on some models)
Noisy Floor may be weak,
operation or causing freezer to
cabinet vibrate when
Possible Causes
Move the control to a temperature setting.
Push the plug completely into the outlet.
Replace fuse or reset the breaker
Check to see if package is holding door/lid open.
Closed the door or reduce the times of opening
the door
See About the operation of your freezer
Check to see if package is holding door/lid open.
Closed the door or reduce the times of opening
the door
See About the operation of your freezer
See Preparing to install the freezer
See About the operation of your freezer
Placing 2 X 4s (51 mm X 102 mm) under the
length of the freezer will help support it and may
reduce vibration.
What To Do
17