Trouble Shooting; Normal Phenomena - Haier BD-181SAA Service Manual

SERVICE MANUAL
Model: BD-181SAA, BD-271SAA
Chapter 8 Trouble shooting

8-1. Normal phenomena

Problem
Temperature control in
Freezer does not
OFF or Min or 0 position.
operate or
Freezer is unplugged.
Power-On Light
is not on
The fuse is blown/circuit
breaker is tripped.
Door/lid left open.
Freezer
starts/stops too
Too frequent or too long to
frequently
door/lid openings.
Temperature control set
too cold.
Door/lid left open.
Freezer operates
too long
Too frequent or too long
door/lid openings.
Temperature control set
too cold.
Inadequate air circulation
space around cabinet.
Fast Freeze switch is in
the ON position (on some
models)
Floor may be weak,
Noisy operation
causing freezer to vibrate
or cabinet
when compressor is on.
vibrates
Cabinet is not positioned
solidly on floor
Door/lid left open.
Freezer
temperature too
warm
Too frequent or too long
door/lid openings.
Temperature control OFF
or Min or 0 positions.
Foods
Freezer is unplugged.
defrosting
The fuse is blown/circuit
breaker is tripped.
Possible Causes
Issue 2011-2-10
Rev.
What To Do
Move the control to a temperature setting.
Push the plug completely into the outlet.
Replace fuse or reset the breaker
Check to see if package is holding door/lid
open.
Closed the door or reduce the times of
opening the door
See About the operation of your freezer
Check to see if package is holding door/lid
open.
Closed the door or reduce the times of
opening the door
See About the operation of your freezer
See Preparing to install the freezer
See About the operation of your freezer
Placing 2 X 4s (51 mm X 102 mm) under
the length of the freezer will help support it
and may reduce vibration.
See Preparing to install the freezer Or use
shims for uneven floor
Check to see if package is holding door/lid
open.
Closed the door or reduce the times of
opening the door
Move the control to a temperature setting.
Push the plug completely into the outlet.
Replace fuse or reset the breaker
Ref1102S001V0
16