Table of Contents
Advertisement
dCS Debussy DAC User Manual
Connecting to a Single AES or SPDIF source
Most source equipment (such as a CD transport or DVD player) is fitted with a single wire digital
output, usually on an RCA phono connector.
Analogue outputs
to amplifier
Paganini Transport
• Connect your source equipment to the matching input on the DAC's rear panel using a suitable
cable.
• Press the
Input
button repeatedly until the
as required.
If the source is active, the DAC will lock to the source and the appropriate sample rate indicator will
illuminate.
Proceed to Step 3.
Debussy DAC Manual v2_2x.docx
Figure 2 – Connecting an SPDIF interface.
AES1, AES2, SPDIF1
Page 9
Software Issue 2.2x
August 2013
or
SPDIF2
indicator illuminates
English version
Advertisement
Table of Contents
