Backlight - MAXTEK DBW02 User Manual

Instructions
Backlight Controls
The displays back light will dim after a set amount of time. To simulate
the display press the 'Scroll' dial to see the display fully lit.
You can change the setting of the backlight's time out duration,
normal and timed out display brightness levels.
To change the time out setting press the 'Backlight' button and select
'Time Out' with the 'Scroll' dial. You can choose from several options
including 'On' which is permanently lit. The listed numbers are the
amount of seconds the display will stay lit before fading out to the time
out display lighting level. Use the 'Scroll' dial to select the required
time out period.
The asterisk in the top right corner indicates the current selection.
To change the main lighting level of the display, press 'Backlight' and
use the 'Scroll' dial to select 'On level' . You will find the options high,
med and low. Use the 'Scroll' dial to select the required lighting level.
The asterisk in the top right corner indicates the current selection.
To change the dim lighting level of the display, press 'Backlight' and
use the 'Scroll' dial to select 'Dim level' . You will find the options high,
med and low. Use the 'Scroll' dial to select the required lighting level.
After Sales Support
UK/N.IRELAND HELPLINE N : 01270 508538
O
REP.IRELAND HELPLINE N : 1800 995 036
O
WEBSITE: www.quesh.co.uk
13
EMAIL: enquiries@quesh.co.uk