Call Transfer
Unscreened Transfer
1.
Press TRANS.
2.
When the called extension begins to signal, hang up to
transfer the call (the Recall Timer start).
3.
Replace the handset, or press the ON/OFF button.
Trunk-To-Trunk Transfer
While connected to an outside line (PBX/Centrex):
1.
Press TRANS. The transfer dial tone sounds.
2.
Press a CO line / Loop flexible button.
-or-
Dial [9].
-or-
Dial a CO line/group access code.
3.
Dial the desired outside line destination number.
4.
Hang up to complete the transfer.
SINGLE LINE TELEPHONE
While connected to an outside line (PBX/Centrex):
1.
Press the FLASH button. A dial tone will sound.
2.
Dial [9].
-or-
Dial a CO line/group access code.
3.
Dial the desired outside line destination number.
E911 feature enabled precludes dial 9 access.
LCR feature enabled precludes Loop button
access.
29