Call Transfer
Executive/Secretary Transfer
If you are the designated Executive station, and your phone is
busy or in DND, all calls will be routed to the Secretary station.
If you are the designated Secretary station, you can signal the
Executive that is busy or in DND by using the Camp On feature.
PBX/Centrex Transfer
While connected to an outside line (PBX/Centrex):
1.
Press FLASH, the transfer dial tone will be heard.
2.
Dial the PBX/Centrex station number, then hang up to
complete the transfer.
SINGLE LINE TELEPHONE
To make a PBX/Centrex Transfer:
1.
Press the FLASH button. An intercom dial tone will
sound.
2.
Dial [660]. A Flash command is presented to the PBX or
Centrex CO Line (a stutter tone will sound).
3.
Dial the desired telephone number, then replace the
handset to complete the transfer.
Screened Transfer
To conduct the transfer, while connected to an outside line:
1.
Press the station button where the call is to be transferred
(if programmed on your telephone), or press TRANS and dial
the station number. The called extension signals according
to the intercom signal switch position.
2.
When that extension answers, announce the transfer.
3.
Hang up to complete the transfer.
27