26
2.
Dial the station number of the ringing telephone.
Group Call Pickup
To create a Pickup Button:
1.
Press SPEED + SPEED.
2.
Press the desired flexible button, then dial #0.
To use Group Call Pickup:
1.
Lift the handset, or press the ON/OFF button.
2.
Dial [#0] on the dial pad, or press a preprogrammed PICKUP
button to connect to the calling party.
SINGLE LINE TELEPHONE
To use Group Call Pickup:
Lift the handset and dial [#0]. You will be connected to
the incoming intercom or outside line call.
Call Transfer
An outside line can be transferred from one phone to another
within the system. The transfer can be screened (announced) or
unscreened to an idle or busy station, or to a UCD or Hunt Group.
Outside line calls can also be transferred to another outside
destination by using a trunk-to-trunk transfer.
You MUST have access to the specific
outside line or a LOOP button to do a
directed call pickup.
You must be in the same Pickup group as the
ringing telephone to pickup the call.
You MUST have access to the specific outside
line or LOOP button to use Group Call Pickup.
Call Transfer