Table of Contents
Advertisement
N0922L, N1322L, F1222L, F1522L
Remote Low Side Service Manual Includes Prodigy Plus
Options
Vari-Smart
Optional adjustable ice level control (KVS)
When this option is present there is an adjustment
post and an additional indicator light to the right of the
four indicator lights mentioned earlier. The ultrasonic
ice level control allows the user to control the point
that the ice machine will stop making ice before the
bin or dispenser is full. Reasons for this include:
• Seasonal changes in ice used
• Planning to sanitize the bin
• Faster turnover for fresher ice
• Certain dispenser applications where maximum ice
level is not desired
There are several positions the ice level can be set
to, including Off (knob and label indicators lined up),
where it fills the bin until the standard bin control shuts
the machine off. See the kit's instructions for complete
details.
Rotate the adjustment post
to the desired ice level. The
machine will fill up to that
level and when it shuts off
the indicator light next to the
adjustment post will be On.
Note: The maximum fill
position is when the arrow on
the knob points to the arrow
on the label
Dispenser applications -
Nugget ice only:
Set the adjustment knob to either the first or second
position CW after the maximum fill position.
Another bin control method available on these
machines is a bin thermostat.
Type: Opens on temperature fall.
Connects: To blue wires to controller, in place of the
jumper connecting the blue wires between terminals 5
and 6.
Use: In certain ice dispenser kits or whenever a
permanently lowered ice level is desired and a KVS is
not suitable.
Mounts: To the control box support strut.
Result when open: Machine shuts down, b in code
display.
Results when closed: Machine makes ice until either
the circuit opens or the photo-eyes are blocked by
ice.
Circuit voltage type: Low
December 2014
Page 24
Advertisement
Table of Contents
