Advertisement
2
3
4
5
Tally Lights
1
HDMI Terminal
2
IN: HDMI signal input terminal
OUT: HDMI signal output terminal
SG-SDI (HD/SD) Terminal (BNC)
3
IN: SDI input terminal - 3G
OUT: 3G-SDI signal output terminal
VIDEO Terminal (BNC)
4
IN: Composite Signal Input Terminal
OUT: Input Signal Through-out Terminal
YPbPr Terminal (BNC)
5
IN: Component Signal Input Terminal
OUT: Input Signal Through-out Terminal
Mini USB Connector
6
Factory Use Only.
Battery Plate Slot
7
Mount ikan BP-2 Style battery plate
Powering the Monitor
Plug the AC Adapter into the power input jack.
Attach the DV Battery Plate on the slot, and connect DV battery to the plate.
Connect a Pro Battery using the optional Pro Battery plate and then plugging that plate with the power tap cable into the DC-In connector.
The pro battery plate kits (PBK17-S or PBK17-A) allow you to go into the field using standard V-Mount or Gold-Mount batteries.
1
6
8
9
7
2-Pin Power Input
8
For use with Pro battery plate adapter.
Vesa 100mm Mount Holes
9
Threaded for M4x.07 Screws. Use to attach Pro Battery
Plate Adapter, or for mounting third-party Vesa mounts.
10
For Future Use
11
3.5mm Audio Input & Output Terminal
Tally Connector
12
13
USB for Firmware Upgrades
COAX Power Input
14
For use with included Power Supply.
15
4-Pin Mini XLR Power Input
16
Hard Power Switch
16
14
10
15
13
12
11
Advertisement
