Mitsubishi Electric MSZ-FH09NA Service Manualce Manual page 17

1. How to set the weekly timer
* Make sure that the current time and day are set correctly.
(1) Press button to enter the weekly timer setting mode.
(2) Press and
Pressing selects the day of
the week to be set.
* All days can be selected.
(3) Press , , and
Pressing
selects ON/OFF timer.
Pressing
adjusts the time.
Pressing
deletes timer setting.
* Hold down the button to change the time quickly.
* The temperature can be set between 61°F and 88°F (16°C and 31°C) at weekly timer.
Press and
(4) Press button to complete and transmit the weekly timer setting.
NOTE:
• Press button to transmit the setting information of weekly timer to the indoor unit. Point the remote controller toward the
indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
setting. Press button once after all the settings are complete. All the weekly timer settings will be saved.
• Press button to enter the weekly timer setting mode, and press and hold
timer settings. Point the remote controller toward the indoor unit.
OBH683B
* blinks.
buttons to select setting day and number
E.g. : [Mon Tue ... Sun]
and [1] are selected.
Pressing selects
the setting number.
buttons to set ON/OFF, time, and temperature.
E.g. : [ON], [AM 6:00] and
[75°F (24°C)] are
selected.
Pressing
adjusts the tem-
perature.
buttons to continue setting the timer for other days and/or numbers.
* which was blink-
ing goes out, and the
current time will be
displayed.
.
button does not have to be pressed per each
button for 5 seconds to erase all weekly
17