First Time Connection - Motorola HC700-L User Manual

First Time Connection

In order to enable USB communication with your host PC,
Microsoft ActiveSync program must be installed on your PC.
The HC700-L is provided with the ActiveSync program
installed. However, the program can be obtained from
Microsoft web site. To learn more about most up-to-date ver-
sion of the ActiveSync and its operation, refer to ActiveSync
help.
Connect the USB cable between the HC700-L and PC. Your PC
will identify the new connection and will request you to point
to the HC700-L software driver (wceusbsh.inf) provided with
this product.
Routine Connection
Just hook the USB cable from the HC700-L to your PC - the
ActiveSync icon will become green and a Partnership window
will show. Check the Guest Partnership and click Next to
popup the ActiveSync program.
Troubleshooting
Table 4: Troubleshooting the HC700-L
Problem
HC700-L
does not turn
on
Cause
HC700-L in Sus-
pend mode
battery is
drained
Battery is not
installed prop-
erly or not
charged
Battery con-
tacts are dirty.
Solution
Press the Power Button
Replace with fresh battery
Ensure proper battery
installation in HC700-L.
Charge or replace the bat-
tery
Remove the battery and
clean the battery contacts
as described in "Cleaning"
on page 22.
23