Download Print this page

Yaesu VX-2R Operating Manual page 10

Hide thumbs Also See for VX-2R:

Advertisement

5/9/10/12.5/15/20/25/50/100 kHz per step, any number of which may be important to
your operating requirements. The VX-2R is set up at the factory with different default
steps on each operating band which probably are satisfactory for most operation.
However, if you need to change the channel step increments, the procedure to do so is
very easy.
1.
Press and hold the [H/L] key for one second to enter the Set mode.
2.
Rotate the DIAL knob to select the Set Mode Item 3: STEP.
3.
Press the [H/L] key momentarily to enable adjustment this Item.
4.
Rotate the DIAL knob to select the new channel step size.
5.
When you have made your selection, press the PTT key to save the new setting and
return to normal operation.
R.F. Says: 9 kHz step is available on the BC band only.
Changing the Operating Mode
The VX-2R provides for automatic mode changing when the radio is tuned to different
operating frequencies. However, should an unusual operating situation arise in which
you need to change between the available operating modes (FM-Narrow, FM-Wide, and
AM), here is the procedure for doing so:
1.
Press and hold the [H/L] key for one second to enter the Set mode.
2.
Rotate the DIAL knob to select the Set Mode Item 4: RX MD.
3.
Press the [H/L] key momentarily to enable adjustment this Item.
4.
Rotate the DIAL knob to select the new operating mode. The available selections
are:
AUTO: Automatic mode setting per default values for the selected frequency range.
N-FM: Narrow-bandwidth FM (used for voice communication)
W-FM: Wide-bandwidth FM (used for high-fidelity broadcasting)
AM: Amplitude Modulation
5.
When you have made your selection, press the PTT key to save the new setting and
return to normal operation.
R.F. Says: Unless you have a compelling reason to do so, leave the Automatic Mode
Selection feature on so as to save time and trouble when changing bands. If you make a
mode change for a particular channel or station, you can always store that one channel
into memory, as the mode setting will be memorized along with the frequency
information.
VX-2R O
10
FCC ID: K66VX-2R
M
PERATING
ANUAL
Vertex Standard Co., Ltd.

Advertisement

loading