Table of Contents
Advertisement
Available languages
Available languages
OPERATING THE RECEIVER
3.4 Time & Timer Setting
1) Time
●
Place the cursor on this sub menu and press OK.
Change mode from Auto to Manual.
●
Press
/
keys to change local time in Time Zone.
The local time will be changed according to your location.
GMT is referred to the standard time of Greenwich by
broadcasting signal. This cannot be changed.
2) Timer
15 timers are supported including timer(s) from EPG.
●
Select the timer number on 'Timer' using
●
Press the
/
keys to choose event repetition you want to
reserve : Daily, Every Sunday, Every Monday, Every Tuesday,
Every Wednesday, Every Thursday, Every Friday, Every Saturday, Once.
If the timer is set from EPG screen, EPG is displayed on 'Event Repetition'.
●
Press the Numerical (0~9) keys to set the time you want and press the
/
keys to choose a switch time you want to reserve. If set time on 'Switch-on
Time' is same as one on 'Switch-off Time', this timer works for 24 hours.
●
Select TV program to set the event program by pressing
When you press the TV/RADIO key, TV program and Radio program are toggled.
●
Even you can set timers on Daily and Every Monday or Every Sunday, etc.
The priority has the least frequent timer. For example, when you set timers on Once and daily,
'Once' will work in stead of 'Daily' at that day. If the timer is running, 'Running' message with
a timer number is displayed on 'Timer'.
3.5 System Information
If you have to contact your service provider or a service center
they might ask for information available from this menu.
Place the cursor on this sub menu and press the OK key.
The following will be the on-screen display.
GB-24
/
keys from 1 to 15.
/
keys.
D
I
G
I
T
A
L
4. Parental Lock
This "Parental Lock" feature sets viewing restrictions and
prevents unauthorized access to your STB through the PIN
(Personal Identification Number), which is a 4 digit number.
(The factory preset PIN Code : 0000)
On selecting this menu, you will have two options:
to set lock for any desired channel and to change your PIN value.
●
Enter PIN Code.
If you have not entered your own PIN Code then the
PIN Code 0000 applies, which was set at the factory.
4.1 Set Channel Lock
●
Select the channel by pressing
numeric keys.
●
When you press the TV/RADIO key, TV list and Radio list
are toggled.
●
Select the channel lock by pressing RED ( i ) key.
●
Press OK key for confirmation.
This will lock the channel. Whenever you need to view the
channel, you will have to enter the PIN at the request window.
After successfully entering PIN code on any locked channel,
you will not need to enter the PIN code once again on any
other locked channel, unless STB was turned off or in
stand-by mode.
To cancel the lock :
●
Press RED ( i ) key again in order to cancel the lock.
S
A
T
E
L
L
I
T
E
R
E
C
E
OPERATING THE RECEIVER
/ , PG+/PG-,
/
or
I
V
E
R
GB-25
Advertisement
Chapters
Table of Contents
