Code Alarm ca1554 Owner's Manual page 9

Button Lock
Press and release
on or off. When the button lock is active, the remote control will beep/vibrate 2 times
when a button is pressed indicating it is locked.
Illumination
Press and release
illumination on or off. When on, the display will illuminate when it receives or sends a
command.
2 Car Mode
To control a second security system enter 2 car mode by pressing
and together for 3 seconds. When the
screen it will control the second security system. Use the same method to exit 2 car
mode and resume control of the original vehicle's security system.
NOTE: A second security system must be installed and the LCD transmitter must be
learned to it before this feature will operate the additional system.
Parking Meter Countdown
The parking meter countdown timer has 6 preset times, to access the preset times
and begin countdown press and release
each additional press of
Adjusting the Clock and Timer Settings
The clock, alarm clock and programmable countdown timer are accessed through the
Function Menu. Press and hold
you have accessed the feature menu press and release
feature and follow the steps below to adjust the settings for each. Press and hold
for 2 seconds to exit the menu.
Clock Hour
Clock Minute
Alarm Clock Hour
Alarm Clock Minute
Alarm Clock ON / OFF
Countdown Timer Hour
Countdown Timer Minute
Countdown Timer ON / OFF
2014 Voxx Electronics Corporation. All rights reserved.
then press hold the
2 times then press and hold
will increase the countdown time.
for 3 seconds to access the function menu, once
Press
Press
Press
Press
Press
Press
Press
Press
for 2 seconds to toggle the button lock
for 2 seconds to toggle
icon appears on the transmitter's LCD
then press and hold
to scroll through each
to increase or
to increase or
to increase or
to increase or
to turn ON or
to increase or
to increase or
to turn ON or
then press
for 2 seconds,
to decrease
to decrease
to decrease
to decrease
to turn OFF
to decrease
to decrease
to turn OFF
9