PROBLEM
Cannot enter a tare weight through keyboard.
After turning on scale there are no displays and no
beeps.
After turning on scale there are no displays, but buzzer
sounds continuously.
Reading weight is unstable.
Troubleshooting
Tare weight must end in the smallest division of scale
weight. (Digital Tare Entry must be enabled)
Make sure scale is plugged into a live outlet.
Unplug scale from outlet and check main fuse.
Make sure weigh platter is mounted on scale correctly.
Make sure no objects are touching weigh platter from
above, side or below.
Scale is out of calibration due to overload or shock
load. Contact service representative.
Make sure no objects are touching weigh platter from
above, side or below.
Make sure scale is level.
Check for air currents, vibration or unstable mounting
surface.
SOLUTION
Page 11