MX-1200i C OLOR OUCH CREEN Congratulations! Using the MX-1200i Connecting the Battery Pack Using the Charging Base Displaying the Settings Screen Sleep Settings System Brightness Power Button Light Date and Time Calibration Pickup Settings Sound Factory Default Exit Maintaining Your MX-1200i...
The MX-1200i can communicate directly to RF base stations, such as the MRF-350i and the MRF-260i. It also natively communicates to URC Lighting via 433 MHz RF. This gives the MX-1200i the ability to control your system without being in direct line-of-sight.
CREEN Using the MX-1200i The MX-1200i's main pages display the activities and devices in your system. Press the MAIN button to view your devices or the activities placed here by your custom installation specialist. Large systems may have more than one page.
Unlock the rear cover by pressing down on the spring lock at the top of the cover. Remove the cover. For shipment from the factory, the battery is left out of the MX-1200i. Place the battery into the battery compartment, making sure you align the contacts on the battery to the contacts on the MX-1200i.
You can enter the Settings menu by pressing and holding the MAIN and ENT button for three seconds. The MX-1200i will timeout after it is idle for 30 seconds and return to the previous setting or Main screen. There are two pages of Settings screens.
MX-1200i C OLOR OUCH CREEN Sleep Settings Conserve energy by configuring the MX-1200i to fall asleep after a specified amount of time. Select an amount of time by adjusting the slide bar. System The System Information screen displays data about your MX-1200i's operating system, memory etc.
PDA stylus to do this. Do not attempt to calibrate using your fingers. Pickup Settings You can set your MX-1200i to only turn on when touched, or every time you move it. Adjust the Pickup Sensor Level by sliding the bar to the desired percentage.
Factory Default WARNING! Only use this button when instructed to by Technical Support. It resets the memory of the MX-1200i to the factory condition. All your programming will be lost! Exit When you have finished adjusting Settings, simply tap the Exit button to return to normal operation.
Keep it away from extreme cold or heat. The MX-1200i is not waterproof. Do not use it in any location that is damp or wet. If you spill water on it, take out the battery pack and let the MX-1200i dry for 48 hours before powering it up again.
WARRANT THAT THE URC SOFTWARE IS BUG-FREE OR ERROR FREE OR THAT THERE ARE NO ERRORS/BUGS IN THE URC SOFTWARE. URC warrants that at the time of purchase the URC equipment and the URC software complied with all applicable regulations and policies of the Federal Communications Commissions (“FCC”) regarding electromagnetic...
Page 13
In the event of any warranty claim, URC will, at its sole option, repair the URC equipment using new or comparable rebuilt parts, or exchange the URC equipment for new or rebuilt equipment.
OF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY, EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO DATA, COMPUTER SYSTEMS OR COMPUTER PROGRAMS.
MX-1200i C OLOR OUCH CREEN Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These lim- its are designed to provide reasonable protection against harmful inter- ference in a residential installation.
) marked power adaptor & same ratings described on the product label (5V DC 1.0A). n Declaration of Conformity “Hereby, Universal Remote Control Inc. declares that this MX-1200i is in compliance with the Essential requirements and other relevant provisions of Directive 1999/5/EC.”...
MX-1200i T OUCH CREEN Declaration of Conformity Company Name Universal Remote Control Inc. Company Address 500 Mamaroneck Avenue, Harrison, NY 10528, U.S.A www.universalremote.com Contact Information Phone: (914)835-4484 Fax: (914)835-4532 Brand Name UNIVERSAL remote control Product Name RF Re-mote Controller Model Name...
MX-1200i T OUCH CREEN Precautions and Information Concerning Rechargeable Lithium-Ion Batteries u If you will not be using your remote control for an extended period of time, be sure to remove the battery u Do not attempt to disassemble, alter or apply heat to the battery.