LeapFrog Creatr-HS Manual page 24

Rescale
The Rescale function gives you the ability to
change the dimensions of a part as a whole
or in only certain specified dimensions.
The Rescale Factor is a multiplying value for
the dimensions in that direction. When the
factor is 1, no rescaling is performed, when
the factor is 2, size is doubled. A factor larger
than 1 will enlarge the part, a factor smaller
than 1 will shrink the part.
Enable Uniform Rescale when you want
to use an identical factor in all directions.
Disable this option if you want to specify a
different value in X, Y and Z.
With the predefined rescale factors you can
easily scale parts from mm to inches and
back.
Duplicate
This command automatically duplicates the
selected parts. The Total Number of Copies
you specify includes your original part.
You can also specify the Array Placement
of the copies i.e. the Number of Copies you
would like to have in the indicated directions
and the Spacing or distance between each
Copy.
Automatic Placement
This command will automatically place parts
on the build platform. Activating this func-
tion will open a dialog where the automatic
placement can be setup. The part interval
will define the space between the parts
when placing the parts automatically. The
platform margin will indicate how far the
parts need to be placed from the borders of
the platform.
The parts to nest selection will give the user
the possibility to select all parts or just the
selected ones.
Creating your own printable file: from STL to gcode
22