LeapFrog Creatr-HS Manual page 20

3.3 Creatr software overview
When you launch Creatr, you will arrive on the Information Page. To start working:
1. Click the Platform flow button and select New to choose your 3D-Printer
2. Click the Part flow button and choose Import to load your STL-file
3. Click the Position flow button if you want to translate, rotate, rescale or duplicate your
part(s)
4. Click the Analyze button to check if your loaded parts are buildable or not
5. Click the Build Processor button if you want to build your part(s) on your 3D-Printer
A. Use the functions on the View toolbar to visualize & inspect your STL-files
B. You can find more advanced visualization & communication options on the Tool sheets
So be ready to 'Go with the Flow':
18
Creating your own printable file: from STL to gcode